Abstract:Energy Recovery Linacs provide high-energy beams, but decelerate those beams before dumping them, so that their energy is available for the acceleration of new particles. During this deceleration, any relative energy spread that is created at high energy is amplified by the ratio between high energy and dump energy. Therefore, Energy Recovery Linacs are sensitive to energy spread acquired at high energy, e.g. from wake fields. One can compensate the time-correlated energy spread due to wakes via energy-dependent time-of-flight terms in appropriate sections of an Energy Recovery Linac, and via high-frequency cavities. We show that nonlinear time-of-flight terms can only eliminate odd orders in the correlation between time and energy, if these terms are created by a beam transport within the linac that is common for accelerating and decelerating beams. If these two beams are separated, so that different beam transport sections can be used to produce time-of-flight terms suitable for each, also even-order terms in the energy spread can be eliminated. As an example, we investigate the potential of using this method for the Cornell x-ray Energy Recovery Linac. Via quadratic time-of-flight terms, the energy spread can be reduced by 66%. Alternatively, since the energy spread from the dominantly resistive wake fields of the analysed accelerator is approximately harmonic in time, a high-frequency cavity could diminish the energy spread by 81%. This approach would require bunch-lengthening and recompression in separate sections for accelerating and decelerating beams. Such sections have therefore been included in Cornell's x-ray Energy Recovery Linac design.

Energy and rf cavity phase symmetry enforcement in multiturn energy recovery linac models

Skyrme Hartree-Fock Calculations for the Alpha Decay Q Values of Super-Heavy Nuclei

Compensation of wake-field-driven energy spread in Energy Recovery Linacs

THE STUDIES FOR ADJUSTABLE ENERGY OF PROTON BEAMS FROM PROTON LINEAR ACCELERATOR

Multiple Energy Storage Rings

Optimization and Measurement for an Electron Side-Coupled Linac with Longitudinally Off-Axis Coupling Cavities

Implications of beam filling patterns on the design of recirculating Energy Recovery Linacs

Symplectic Modeling of Beam Loading in Electromagnetic Cavities

Modeling and multidimensional optimization of a tapered free electron laser

Tuning methods for multigap drift tube linacs

Optimisation of klystron operational efficiency at ESS

Matched phase sweep method for the optimization of bunching factor in dual rf systems of high-intensity hadron synchrotrons

HOM-Damping Studies in a Multi-Cell Elliptical Superconducting RF Cavity for the Multi-Turn Energy Recovery Linac PERLE

Optimization of Single-Step Tapering Amplitude and Energy Detuning for High-Gain FELs

Optimization study for RF cavity and beam dynamics simulation in the electron linear accelerator using the multi-objective genetic algorithm

Scheme for quantitative description of longitudinal drifts in the Fermilab Linac and their correction

Quantitative description and correction of longitudinal drifts in the Fermilab linac

Beam dynamics framework incorporating acceleration to define the minimum aperture in two focusing schemes for proton radiotherapy linac

Beam Optimization of Helium Injector for Coupled RFQ–SFRFQ Linac

Design of a 10 MeV normal conducting CW proton linac based on equidistant multi-gap CH cavities

Multi-physics Analysis and Experiment of a CW Four-Rod RFQ