Abstract:Alvarez-type Drift Tube Linacs (DTLs) are commonly adopted to accelerate the proton or heavy ion beam with the speed range about 0.04 similar to 0.4 times of the light speed in vacuum. Acquisition of appropriate frequency and distribution of the electromagnetic field, and the field stability inside the Alvarez-type DTL cavity are essential to achieve good beam characteristics. The field requirement can be achieved through tuning by tuners and post couplers when the cavity is off-line. The field stability of cavity is usually measured by the tilt sensitivity and the minimum frequency interval between the operation mode and the nearest neighbor mode. The frequency interval will increase with the reduction of the number of the acceleration units (cells) inside the cavity, which is beneficial to fulfill the tilt sensitivity requirement. If the field stability condition is naturally satisfied, the post couplers inside the DTL cavity are not needed, and the cavity frequency and field distribution can be tuned merely by tuners. In this paper, the tuning method based on the pseudo-inverse matrix is applied to the Alvarez-type DTL cavity without post couplers in Xi'an 200 MeV proton application facility (XiPAF). The method is improved by an expanded matrix algorithm and the tuning process is optimized to expedite the iteration during the tuning. The XiPAF DTL cavity has 23 cells and 5 tuners. By adjusting the insertion depths of the tuners, the tuning was achieved in merely one round of iteration. After tuning, the relative error of the peak field distribution and resonant frequency of the cavity reached to within +/- 3% and 325 +/- 0.007 MHz (25 degrees C, vacuum), respectively. It was verified that the field stability meets the requirement from the physical design both before and after tuning.

Quantitative description and correction of longitudinal drifts in the Fermilab linac

Scheme for quantitative description of longitudinal drifts in the Fermilab Linac and their correction

Time-drift Aware RF Optimization with Machine Learning Techniques

Beam Loss Monitoring with Fixed and Translating Scintillation Detectors Along the Fermilab Drift-tube Linac

Skyrme Hartree-Fock Calculations for the Alpha Decay Q Values of Super-Heavy Nuclei

Tuning methods for multigap drift tube linacs

Undulator linear taper control at the European X-Ray Free-Electron Laser facility

Upgrades of beam diagnostics in support of emittance-exchange experiments at the Fermilab A0 photoinjector

Automatic Drift Compensation Using Phase Correlation Method for Nanomanipulation

Optimization of Superconducting Linac for Proton Improvement Plan-II (PIP-II)

Drift Observations and Mitigation in LCLS-II RF

Improved Calibration of RF Cavities for Relativistic Electron Beams: Effects of Secondary Corrections and Experimental Verification

Longitudinal Instability Caused By Long Drifts In The C-Ads Injector- I

RF measurement and tuning for an Alvarez-type drift tube linear accelerator without post couplers

Finding beam loss locations in a linac with oscillating dipole correctors

Beam Based RF Voltage Measurements and Longitudinal Beam Tomography at the Fermilab Booster

Energy and rf cavity phase symmetry enforcement in multiturn energy recovery linac models

Compensation of wake-field-driven energy spread in Energy Recovery Linacs

Emittance Measurements with Wire Scanners in the Fermilab Side-coupled Linac

Machine learning based longitudinal virtual diagnostics at SwissFEL

Implementation of the beam-loading effect in the tracking code RF-track based on a power-diffusive model