Abstract:Laser metal deposition (LMD) is of the directed energy deposition (DED) process which is widely used for producing large-scale, dense, and functional parts in the field of additive manufacturing (AM). This research work investigates the microstructure and mechanical properties of PH 13–8 Mo martensitic stainless-steel parts produced via LMD. The workshop trials were conducted using an LMD system collaborated with a robotic arm to deposit single-track thin walls and horizontal blocks. The microstructural characteristics of the additively manufactured parts were analyzed using an optical microscope. The mechanical properties were evaluated through hardness measurements and uniaxial tensile tests. The influence of energy density and powder deposition density on the characteristic geometry of straight walls was also investigated. The microstructural analysis showed that the microstructure consisted of columnar dendrites that grew epitaxially from the substrate, with primary austenite cells containing intercellular ferrite and martensite laths that were roughly parallel with the retained austenite. When the energy density increased from 43 to 86 J/mm 2 (a doubling of energy density), there was an increase in secondary dendritic arm spacing (SDAS) by approximately 250% in the first layer and approximately 90% in the top layer. The difference in SDAS change between the first and top layers can be attributed to the difference in cooling rates experienced by each layer during the additive manufacturing process. Increasing powder deposition density from 0.5 to 1 g/min results in a decrease in porosity from 3% to less than 1% and an increase in strength from 800 to over 1000 MPa. The hardness of the deposits was found to range from 300 to 400 HV. This variation in hardness can be attributed to differences in microstructure resulting from changes in cooling rates at different heights.

Exploring Potentialities of Direct Laser Deposition: Thin-Walled Structures

Identifying optimum process strategy to build geometrically stable cylindrical wall structures using laser directed energy deposition based additive manufacturing

Advancements in 3D Printing: Directed Energy Deposition Techniques, Defect Analysis, and Quality Monitoring

Ti6Al4V Thin Walls Production using Laser Directed Energy Deposition (L-DED) Process

Macroscopic and Microstructural Features of Metal Thin-Wall Fabricated by Laser Material Deposition: A Review

Post-processing of additively manufactured IN625 thin-walled structures using laser remelting in directed energy deposition

Current research and industrial application of laser powder directed energy deposition

Study of process window development for high deposition-rate laser material deposition by using mixed processing parameters

Low-Defect AM of High Strength Aluminium Alloy by LMD

3D printing of aluminum alloys using laser powder deposition: a review

Fabrication of Thin-Wall Structures with a Femtosecond Laser and Stainless Steel Powder

Influence of Process Parameters and Deposition Strategy on Laser Metal Deposition of 316L Powder

Dynamics of pore formation during laser powder bed fusion additive manufacturing

Mechanical Properties and Microstructural Features of Direct Laser-Deposited Ti-6Al-4V

Laser-Aided Directed Energy Deposition of Steel Powder over Flat Surfaces and Edges

Laser direct metal deposition of variable width thin-walled structures in Inconel 718 alloy by coaxial powder feeding

Modeling of Temperature Field Evolution During Multilayered Direct Laser Metal Deposition

Directed energy deposition of PH 13–8 Mo stainless steel: microstructure and mechanical property analysis

Geometrical study of 5356 aluminium alloy by means of a concentric wire laser metal deposition

Directed energy deposition + mechanical interlayer deformation additive manufacturing: a state-of-the-art literature review

Interplay between powder catchment efficiency and layer height in self-stabilized laser metal deposition