Abstract:Characterizing the behavior of ductile metals at high strains is essential in various fields. In the case of thin sheets, rectangular cross-section specimens are used to characterize these materials, typically by tensile tests. Unlike cylindrical specimens, flat ones pose additional challenges for the hardening characterization at high strains, especially in the post-necking phase, which, for many high-strength steels, may cover most of the plastic strain range. After the onset of global necking, the rectangular cross-sections tend to distort with respect to their original shape, as their edges progressively curve and bulge inward. The localized necking occurring after the global one in thinner specimens, further distorts the necked zone. Additionally, sheet metals usually exhibit anisotropic characteristics that affect the derivation of the stress–strain curve and need to be dealt with. No exact method exists for the stress–strain characterization of ductile thin sheets at high strains from tensile tests. Although several approximate methods are available in the literature, they either discard the post-necking range or require highly advanced and complex experimental setups not suitable for industrial applications (e.g., 3D DIC). Then, this work proposes a relatively simple methodology for the experimental characterization of anisotropic thin sheet metals through tensile tests on rectangular cross-section specimens that delivers the true stress–strain curve of the material, extended over the necking range and up to fracture, accurately assessing the anisotropy and the distortion of the neck section. The proposed methodology, employing a standard single-camera experimental setup, is illustrated here, referring to four different steels for automotive applications with reference to a single material orientation; it is intended as representative of the repeated procedure involving tensile tests along 3 or more material directions in order to describe the whole anisotropic plastic response. A detailed comparison between the novel methodology and four other common approaches is carried out, highlighting the differences and the enhanced capabilities of the novel one proposed.

Study on the Effect of Anisotropy on Plastic Flow Localization of Third Generation Advanced High Strength Steel

Study on the Plastic Anisotropy of Advanced High Strength Steel Sheet: Experiments and Microstructure-Based Crystal Plasticity Modeling

PLASTIC FLOW CHARACTERISTICS AND CONSTITUTIVE RELATION FOR ULTRA HIGH STRENGTH STEEL AF1410

Anisotropic Fracture Behavior of the 3rd Generation Advanced High-Strength – Quenching and Partitioning Steels: Experiments and Simulation

The experimental study on plastic flow and anisotropic properties of the new generation Aluminum Lithium alloy sheet

Multi-scale Modelling of Evolving Plastic Anisotropy During Al-alloy Sheet Forming

Damage Analysis of Third-Generation Advanced High-Strength Steel Based on the Gurson–Tvergaard–Needleman (GTN) Model

The Evaluation of Formability of the 3rd Generation Advanced High Strength Steels QP980 Based on Digital Image Correlation Method

Testing and Modeling the Effect of Strain-Rate on Plastic Anisotropy for A Traditional High Strength Steel

Effect of alloying and microstructure on formability of advanced high-strength steels processed via quenching and partitioning

An Enhanced Approach for High-Strain Plasticity in Flat Anisotropic Specimens with Progressively Distorting Neck Sections

A Virtual Laboratory Based on Full-Field Crystal Plasticity Simulations to Predict the Anisotropic Mechanical Properties of Advanced High Strength Steels

Failure Characteristics of Extra-Formable Steel Sheet Exhibiting Inhomogeneous Deformation Bands

The 3rd Generation Automobile Sheet Steels Presenting with Ultrahigh Strength and High Ductility

Local formability of medium-Mn steel

A Review of Sheet Metal Forming Evaluation of Advanced High-Strength Steels (AHSS)

Chemical Composition Optimization and Isothermal Transformation of δ‐Transformation‐Induced Plasticity Steel for the Third‐Generation Advanced High‐Strength Steel Grade

Formability Evaluation of Sheet Metals Based on Global Strain Distribution

Anisotropic Fracture of Advanced High Strength Steel Sheets: Experiment and Theory

Investigating the Formability and Failure Mechanism of an Advanced High Strength Steel by a Microstructure-Based Hierarchy Modeling Approach