Abstract:This work proposes a wide‐temperature localized high‐concentration electrolytes (LHCE) with a high safety feature. A particular electrolyte additive of the electrolytes, 1‐fluoroethyl methyl carbonate (1FEMC), is explored to improve the performance of electrolytes with a better interfacial stability than the previously reported multifunctional additive (4,5‐difluoro‐1,3‐dioxolan‐2‐one DFEC). The 1FEMC achieves an inorganic‐dominated solid electrolyte interphase at both cathode and anode, which leads to an uniform lithium deposition and inhibits the electrolyte decomposition as well as cathode degradation. This LHCE achieves over 300 stable cycles for both LiNi0.9Mn0.05Co0.05O2||Li cells and LiCoO2||Li cells, as well as 50 cycles for LiNi0.8Mn0.1Co0.1O2 (NCM811||Li) pouch cells. Additionally, NCM811||Li cells maintains 84% discharge capacity at −20 °C (compared with that at room temperature). This work presents a research foundation for designing safer Li‐metal batteries that operate in a wide temperature range. The increasing need for energy storage devices with high energy density has led to significant interest in Li‐metal batteries (LMBs). However, the use of commercial electrolytes in LMBs is problematic due to their flammability, inadequate performance at low temperatures, and tendency to promote the growth of lithium dendrites and other flaws. This study introduces a localized high‐concentration electrolyte (LHCE) that addresses these issues by employing non‐flammable electrolyte components and incorporating carefully designed additives to enhance flame retardancy and low‐temperature performance. By incorporating additives to optimize the electrolyte, it is possible to attain inorganic‐dominated solid electrolyte interphases on both the cathode and anode. This achievement results in a uniform deposition of lithium, as well as the suppression of electrolyte decomposition and cathode deterioration. Consequently, this LHCE achieve over 300 stable cycles for both LiNi0.9Mn0.05Co0.05O2||Li cells and LiCoO2||Li cells, as well as 50 cycles for LiNi0.8Mn0.1Co0.1O2 (NCM811||Li) pouch cells. Furthermore, NCM811||Li cells maintain 84% discharge capacity at −20 °C, in comparison to the capacity at room temperature. The utilization of this electrolyte presents novel perspectives for the safe implementation of LMBs.

Application of 1-butyl-3-menthylimidazolium-hexafluorophosphate as flame retardant in electrolyte of lithium ion battery

Flame-Retardant Electrolyte Solution for Dual-Ion Batteries

Non-flammable fluorobenzene-diluted highly concentrated electrolytes enable high-performance Li-metal and Li-ion batteries

Advanced Low-Flammable Pyrrole Ionic Liquid Electrolytes for High Safety Lithium-Ion Batteries

Insight into the probability of ethoxy(pentafluoro)cyclotriphosphazene (PFPN) as the functional electrolyte additive in lithium-sulfur batteries

Enhancement of flame retardancy of solid polymer electrolyte based on phosphorus-containing ionic liquid polyurethane membrane for safe lithium batteries

Dimethyl methylphosphonate-based nonflammable electrolyte and high safety lithium-ion batteries

Research on a new bifunctional electrolyte additive for lithium-ion batteries

Fluorinated Carbonate‐Aided Ionic‐Liquid Electrolyte Enables High‐Capacity Lithium Metal Batteries

Molecular Design of Mono‐Fluorinated Ether‐Based Electrolyte for All‐Climate Lithium‐ion Batteries and Lithium‐Metal Batteries

Non-coordinating flame retardants with varied vapor pressures enabling biphasic fire-extinguishing electrolyte for high safety lithium-ion batteries

Flame-retardant concentrated electrolyte enabling a LiF-rich solid electrolyte interface to improve cycle performance of wide-temperature lithium–sulfur batteries

Dimethyl methylphosphonate (DMMP) as an efficient flame retardant additive for the lithium-ion battery electrolytes

Flame-retarding quasi-solid polymer electrolytes for high-safety lithium metal batteries

A Self Fire-extinguishing and High Rate Lithium-Fluorinated Carbon Battery Realized by Ethoxy (pentafluoro) cyclotriphosphazene Electrolyte Additive Design

Deep and Comprehensive Study on the Impact of Different Phosphazene‐Based Flame‐Retardants Additives on Electrolyte Properties, Performance and Durability of High Voltage LMNO‐Based Lithium‐Ion Batteries

Progress of Enhancing the Safety of Lithium Ion Battery from the Electrolyte Aspect

A flame retardant benzimidazole-linked covalent organic framework as an organic solution sponge for acceleration of Li+-ion migration in solid-state electrolytes

Bridging role of ethyl methyl carbonate in fluorinated electrolyte on ionic transport and phase stability for lithium-ion batteries

Achieving Uniform Li Deposition and Suppressed Electrolyte Flammability in Li‐Metal Batteries via Designing Localized High‐Concentration Electrolytes

Non‐Fluorinated Cyclic Ether‐Based Electrolyte with Quasi‐Conjugate Effect for High‐Performance Lithium Metal Batteries