Abstract:This work proposes a wide‐temperature localized high‐concentration electrolytes (LHCE) with a high safety feature. A particular electrolyte additive of the electrolytes, 1‐fluoroethyl methyl carbonate (1FEMC), is explored to improve the performance of electrolytes with a better interfacial stability than the previously reported multifunctional additive (4,5‐difluoro‐1,3‐dioxolan‐2‐one DFEC). The 1FEMC achieves an inorganic‐dominated solid electrolyte interphase at both cathode and anode, which leads to an uniform lithium deposition and inhibits the electrolyte decomposition as well as cathode degradation. This LHCE achieves over 300 stable cycles for both LiNi0.9Mn0.05Co0.05O2||Li cells and LiCoO2||Li cells, as well as 50 cycles for LiNi0.8Mn0.1Co0.1O2 (NCM811||Li) pouch cells. Additionally, NCM811||Li cells maintains 84% discharge capacity at −20 °C (compared with that at room temperature). This work presents a research foundation for designing safer Li‐metal batteries that operate in a wide temperature range. The increasing need for energy storage devices with high energy density has led to significant interest in Li‐metal batteries (LMBs). However, the use of commercial electrolytes in LMBs is problematic due to their flammability, inadequate performance at low temperatures, and tendency to promote the growth of lithium dendrites and other flaws. This study introduces a localized high‐concentration electrolyte (LHCE) that addresses these issues by employing non‐flammable electrolyte components and incorporating carefully designed additives to enhance flame retardancy and low‐temperature performance. By incorporating additives to optimize the electrolyte, it is possible to attain inorganic‐dominated solid electrolyte interphases on both the cathode and anode. This achievement results in a uniform deposition of lithium, as well as the suppression of electrolyte decomposition and cathode deterioration. Consequently, this LHCE achieve over 300 stable cycles for both LiNi0.9Mn0.05Co0.05O2||Li cells and LiCoO2||Li cells, as well as 50 cycles for LiNi0.8Mn0.1Co0.1O2 (NCM811||Li) pouch cells. Furthermore, NCM811||Li cells maintain 84% discharge capacity at −20 °C, in comparison to the capacity at room temperature. The utilization of this electrolyte presents novel perspectives for the safe implementation of LMBs.

Non-flammable fluorobenzene-diluted highly concentrated electrolytes enable high-performance Li-metal and Li-ion batteries

A Safe Electrolyte Enriched with Flame-Retardant Solvents for High-Voltage LiCoO2||Graphite Pouch Cells

High-safety and high-voltage lithium metal batteries enabled by nonflammable diluted highly concentrated electrolyte

Stable Non‐flammable Phosphate Electrolyte for Lithium Metal Batteries via Solvation Regulation by the Additive

Non‐Flammable Electrolyte with Lithium Nitrate as the Only Lithium Salt for Boosting Ultra‐Stable Cycling and Fire‐Safety Lithium Metal Batteries

Achieving Uniform Li Deposition and Suppressed Electrolyte Flammability in Li‐Metal Batteries via Designing Localized High‐Concentration Electrolytes

The High-Fluorinated Bi-Molecular Combination Enables High-Energy Lithium Batteries under Challenging Environment

Nonflammable Electrolytes for Lithium Ion Batteries Enabled by Ultraconformal Passivation Interphases

Anion-Tuned Fluorinated Solvation Sheath Enables Stable Lithium Metal Batteries

Non‐Fluorinated Cyclic Ether‐Based Electrolyte with Quasi‐Conjugate Effect for High‐Performance Lithium Metal Batteries

Non-Flammable Ester Electrolyte with Boosted Stability Against Li for High-Performance Li metal Batteries

1,3,5-Trifluorobenzene and fluorobenzene co-assisted electrolyte with thermodynamic and interfacial stabilities for high-voltage lithium metal battery

Nonflammable electrolyte with low exothermic design for safer lithium-based batteries

Non‐Flammable Ester Electrolyte with Boosted Stability Against Li for High‐Performance Li Metal Batteries

A Nonflammable Diethyl Ethylphosphonate-Based Electrolyte Improved by Synergistic Effect of Lithium Difluoro(Oxalato)Borate and Fluoroethylene Carbonate

Nonflammable, localized high-concentration electrolyte towards a high-safety lithium metal battery

Non-flammable ultralow concentration mixed ether electrolyte for advanced lithium metal batteries

Bidirectional Interphase Modulation of Phosphate Electrolyte Enables Intrinsic Safety and Superior Stability for High-Voltage Lithium-Metal Batteries.

Safer Triethyl-Phosphate-Based Electrolyte Enables Nonflammable and High-Temperature Endurance for a Lithium Ion Battery

An Inorganic‐Dominate Molecular Diluent Enables Safe Localized High Concentration Electrolyte for High‐Voltage Lithium‐Metal Batteries

Flame-retardant Electrolyte with Boosted Interfacial Stability for Practical Li Metal Batteries