Abstract:Fluorinated electrolytes based on fluoroethylene carbonate (FEC) have been considered as promising alternative electrolytes for high-voltage and high-energy capacity lithium-ion batteries (LIBs). However, the compatibility of the fluorinated electrolytes with graphite negative electrodes is unclear. In this paper, we have systematically investigated, for the first time, the stability of fluorinated electrolytes with graphite negative electrodes, and the result shows that unlike the ethylene carbonate (EC)-based electrolyte, the FEC-based electrolyte (EC was totally replaced by FEC) is incapable of forming a protective and effective solid electrolyte interphase (SEI) that protects the electrolyte from runaway reduction on the graphite surface. The reason is that the lowest unoccupied molecular orbital energy levels are also lowered by the introduction of fluorine into the solvent, and the FEC solvent has poorer resistance against reduction, leading to instability on the graphite negative electrode. To tackle this problem, two lithium salts of lithium bis(oxalato)borate and lithium difluoro(oxalato)borate (LiDFOB) have been investigated as negative-electrode film-forming additives. Incorporation of only 0.5 wt % LiDFOB to a FEC-based electrolyte [1.0 M LiPF6 in 3:7 (FEC−ethyl methyl carbonate)] results in excellent cycling performance of the graphite negative electrode. This improved property originates from the generation of a thinner and better quality SEI film with little LiF by the sacrificial reduction of the LiDFOB additive on the graphite negative electrode surface. On the other hand, this additive can stabilize the electrolyte by scavenging HF. Meanwhile, the incorporated LiDFOB additive has positive influence on the interphase layer on the positive electrode surface and significantly decreases the amount of HF formation, finally leading to improved cycling stability and rate capability of LiNi0.5Mn1.5O4 electrodes at a high cutoff voltage of 5 V. The data demonstrate that the LiDFOB additive not only exhibits a superior compatibility with graphite but also improves the electrochemical properties of high-voltage spinel LiNi0.5Mn1.5O4 positive electrodes considerably, confirming its potential as a prospective, multifunctional additive for 5 V fluorinated electrolytes in high-energy capacity lithium-ion batteries (LIBs).

Bridging role of ethyl methyl carbonate in fluorinated electrolyte on ionic transport and phase stability for lithium-ion batteries

Tuning Fluorination of Linear Carbonate for Lithium-Ion Batteries

Enhancing the Performance and Stability of Li-Ion Batteries with Fluorinated Electrolytes: Insights from MD Simulation and Experimental Analysis

Electrolyte engineering via ether solvent fluorination for developing stable non-aqueous lithium metal batteries

Molecular Design of Mono‐Fluorinated Ether‐Based Electrolyte for All‐Climate Lithium‐ion Batteries and Lithium‐Metal Batteries

Fluorinated Electrolytes for Li-Ion Batteries: The Lithium Difluoro(oxalato)borate Additive for Stabilizing the Solid Electrolyte Interphase

Fluorinated ether electrolyte with controlled solvation structure for high voltage lithium metal batteries

Fluorinated Cyclic Ether Co-solvents for Ultra-high-Voltage Practical Lithium-Metal Batteries

Multilevel Regulation of Li+-solvent Interaction for Fluorophosphate-Based Nonflammable Electrolyte Enabling Lithium-Ion Batteries with Long Calendar Life

Stabilization of High-Voltage Lithium Metal Batteries Using a Sulfone-Based Electrolyte with Bi-Electrode Affinity and LiSO2F-rich Interphases

Regulating the Solvation Structures and Interfacial Stability by Localized High Concentration Electrolytes for Stable Lithium Metal Batteries

Terminally Fluorinated Glycol Ether Electrolyte for Lithium Metal Batteries

Xia, Lan and Lee, Saixi and Jiang, Yabei and Xia, Yonggao and Chen, George Z. and Liu, Zhaoping (2017) Fluorinated electrolytes for li-ion batteries: the lithium difluoro(oxalato)borate additive for stabilizing the solid

Lithium-Ion Battery Electrolyte Containing Fluorinated Solvent and Additive

Improved high-temperature performance of LiNi0.5Co0.2Mn0.3O2/artificial graphite lithium ion pouch cells by difluoroethylene carbonate

Enhanced Performance of Lithium Metal Batteries via Cyclic Fluorinated Ether Based Electrolytes

Fluorinated Carbonate‐Aided Ionic‐Liquid Electrolyte Enables High‐Capacity Lithium Metal Batteries

A Fluorinated Ether Co-solvent Enables High Operating Temperature Li-ion Batteries

The High-Fluorinated Bi-Molecular Combination Enables High-Energy Lithium Batteries under Challenging Environment

Fluorination promotes lithium salt dissolution in borate esters for lithium metal batteries

Highly Fluorinated Co-Solvent Enabling Ether Electrolyte for High-Voltage Lithium Ion Batteries with Graphite Anode