Abstract:Aiming to polish up the denitrification efficiency and N2 selectivity for MnCeO x catalyst at low temperature, an array of Fe3+-doped MnCeO x catalysts were synthesized through innovative approaches: the citric acid method (FeMnCeO x -CA) and CTAB-assisted template method (FeMnCeO x -ST). However, the catalysts prepared by CTAB-assisted template method (MnCeO x -ST and FeMnCeO x -ST catalysts) did not exhibit an excellent low-temperature activity compared with the catalysts made by citric acid method (MnCeO x -CA and FeMnCeO x -CA catalysts) below 300 °C. Therefore, an in-depth investigation of underlying impact of citric acid method and Fe3+ doping on MnCeO x catalyst was thoroughly implemented. We finally found that the main function of citric acid is to enhance the internal electron transfer of the catalyst by facilitating the mutual conversion between active components, particularly Mn4+/Mn3+, thereby improving the denitrification activity of FeMnCeO x -CA catalyst at low temperature. Further, the NH3-SCR performance of FeMnCeO x -CA exceed 90 % NO x conversion within 75–150 °C, and it can be reached 94 % NO x conversion at 125 °C, which was almost 10 % higher than that of MnCeO x -CA catalyst. Moreover, the N2O formation of FeMnCeO x -CA is significantly suppressed at temperatures ranging from 125-200 °C, exhibiting a higher N2 selectivity compared to MnCeO x -CA. Besides, solid solution structure of −Ce-O-Mn-O-Fe- formed after Fe3+ doping in MnCeO x catalyst strengthened surface acidity and redox ability over FeMnCeO x -CA catalyst, promoting NH3 adsorption and activation. On the other hand, the FeMnCeO x -CA catalyst exhibits the highest content of Ce3+ and Mn4+, facilitating oxygen vacancies formation and redox capacity, thereby promoting the key intermediates generation in the microscopic NH3-SCR reaction process. Finally, a reasonable Langmuir-Hinshelwood mechanism and detailed reaction pathways of NH3-SCR reaction existed on FeMnCeO x -CA catalyst were also proposed.

Catalytic performance of calcined Fe2O3/CA catalyst for NH3-SCR reaction: Role of activation temperature

New Insights into the Relationships Between Performance and Physicochemical Properties of FeOx–NbOx Mixed Oxide Catalysts for the NH3-SCR Reactions

Highly Efficient Fe-Cu/CL Catalysts Based on Low-Cost Clay Minerals for NH3-SCR of NOx at Low Temperature

Tailoring the Proceeding of the NH3-SCO and NH3-SCR Reactions over FeOx Catalysts by Modifying with NbOx

Boosted Denitration Activity of Α-Fe2o3 for Low-Temperature NH3-SCR by Addition of Ce/Cu

Influence of Calcination Temperature on Fe/Hbea Catalyst for the Selective Catalytic Reduction of Nox with Nh3

Influence of calcination temperature on the evolution of Fe species over Fe-SSZ-13 catalyst for the NH3-SCR of NO

C,N‐modified TiO2‐supported Mn–Ce–Cox‐based Catalyst for Low‐temperature NH3‐SCR

Optimization of Robust FeMnSmO x Catalyst for Low-Temperature (<150 °C) NH 3 –SCR of NO x

A Highly Effective Catalyst of Sm-Mn Mixed Oxide for the Selective Catalytic Reduction of Nox with Ammonia: Effect of the Calcination Temperature

Optimization of Robust FeMnSmOx Catalyst for Low-Temperature (<150 °C) NH3–SCR of NOx

Mechanistic insights into the influence of preparation methods and Fe3+ doping on the low-temperature performance of MnCeO catalyst for NH3-SCR reaction

Selective Catalytic Reduction of No with Nh3 over Mnox-Ceo2-Wo3-Zro2: Effect of Calcination Temperature

Effect of Fe2O3 on ZrTiO4 Support for NH3-SCR Catalytic Performance

Effect of Calcination Temperature on the Activation Performance and Reaction Mechanism of Ce–Mn–Ru/TiO 2 Catalysts for Selective Catalytic Reduction of NO with NH 3

Efficient FeMn/Al2O3 catalyst for NH3-SCR of NO at low temperature: the Influence of Strong Interactions Between Active Components and Carrier

Modulating the Activity and SO2 Resistance of Α-Fe2o3 Catalysts for NH3-SCR of NOx Via Crystal Facet Engineering

Revealing the Excellent Low-Temperature Activity of the Fe1–xCexOδ-S Catalyst for NH3-SCR: Improvement of the Lattice Oxygen Mobility

Improvement of sulfur and water resistance with Fe-modified S-MnCoCe/Ti/Si catalyst for low-temperature selective catalytic reduction of NO with NH3

Performance of Fe-ZSM-5 for Selective Catalytic Reduction of NO X with NH 3 : Effect of the Atmosphere During the Preparation of Catalysts

Enhancing low-temperature NH3-SCR performance of Fe–Mn/CeO2 catalyst by Al2O3 modification