Abstract:A major part of energy consumption is reported from the residential and commercial buildings due to the large usage of mechanical devices to maintain a comfortable indoor ambiance. Thermal conductivity of the materials used in these buildings can be reduced by using low density materials and an efficient thermal energy storage strategy. In the present paper, the thermal performance of a building envelope was improved by incorporating phase change material (PCM) into the foam concrete mix. At first, PCM was developed by using a light weight material, expanded vermiculite (EV) impregnated with capric acid (CA) and ethyl alcohol (EA) under vacuum conditions. Different foam composite mixes were prepared and experimentally tested. Foam concrete mixtures with EV, CA-EA/EV based PCM, and PCM with added nano silica and coir fiber combinations (PSC) were prepared by the replacement of fine aggregate (M−sand) in various weight percentages. This study reveals that PCM with a CA to EV proportion of 55% (wt.) had the maximum adsorption and stability, as assessed through liquid leakage. In addition to improving thermal efficiency, PCM enhanced foam concrete composites showed improved mechanical, hydration, durability, and thermal characteristics. In comparison to the control foam concrete and PCM foam concrete mixes, the addition of nano silica and coir fiber added foam concrete mixtures (PSC) demonstrated improved strength and shrinkage qualities. These improved properties are attributed to the pozzolanic activity of nano silica and the bridging effects resulting from the fiber to micro cracks. Apart from the durability and strength characteristics, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), differential scanning calorimetry (DSC), and thermogravimetry analysis (TGA) were adopted to characterize the morphological, chemical, and thermal aspects of the different foamed concrete mixtures. The DSC results proved that the PSC-5% foam concrete mixture had latent heat capacities of 43.90 J/g for cooling and 69.16 J/g for heating, with melting and solidification temperatures of 31.51 °C and of 21.77 °C, respectively. TGA also revealed that the proposed PCM composite has a high thermal resistance. The PSC-5% shows better compatibility as per SEM and EDS tests by the proper penetration of the nano silica in the foamed composites through the pores. Finally, the thermal analysis tests demonstrated that the PSC-5% has a thermal conductivity of 0.129 W/m-K, which is 49.60% lesser than the foam concrete control sample, and also possesses an improved heat storage capacity, which ensures better thermal comfort in buildings.

Experimental evaluation of composite concrete incorporated with thermal energy storage material for improved thermal behavior of buildings

Preparation and Characterization of Fatty Acid Ternary Eutectic Mixture/Nano-Sio 2 Composite Phase Change Material for Building Applications

Thermal Conductivity of Aerated Concrete (AC) Composites Containing Micro-Encapsulated Phase Change Materials

Development of Thermal Energy Storage Lightweight Structural Cementitious Composites by Means of Macro-Encapsulated PCM

Preparation and characterization of innovative cement mortar incorporating fatty acid/expanded graphite composite phase change material for thermal energy storage

Paraffin/diatomite composite phase change material incorporated cement-based composite for thermal energy storage

Study on foam concrete incorporated with expanded vermiculite/capric acid PCM – A novel thermal storage high-performance building material

Phase change materials embedded in expanded clay aggregates to develop energy storage concrete: A review

A Review of Recent Improvements, Developments, Effects, and Challenges on Using Phase-Change Materials in Concrete for Thermal Energy Storage and Release

Multiphysics study on cement-based composites incorporating green biobased shape-stabilized phase change materials for thermal energy storage

A cost-effective form-stable PCM composite with modified paraffin and expanded perlite for thermal energy storage in concrete

A novel measurement method of thermal performances for an improved thermal storage concrete with microencapsulated phase change materials

Investigation of physico-mechanical, thermal properties and solar thermoregulation performance of shape-stable attapulgite based composite phase change material in foam concrete

Thermal energy management in buildings and constructions with phase change material-epoxy composites: a review

Thermophysical and Mechanical Properties of Hardened Cement Paste with Microencapsulated Phase Change Materials for Energy Storage

Experimental analysis of clay bricks incorporated with phase change material for enhanced thermal energy storage in buildings

Experimental study and assessment of thermal energy storage mortar with paraffin/recycled brick powder composite phase change materials

Thermal Performance Assessment of Concrete Walls Using Different Phase Change Materials

Experimental investigation of eutectic PCM incorporated clay brick for thermal management of building envelope

Thermal Conductivity Enhancement of Form-Stable Tetradecanol/expanded Perlite Composite Phase Change Materials by Adding Cu Powder and Carbon Fiber for Thermal Energy Storage

Structural-functional integrated concrete with macro-encapsulated inorganic PCM