Abstract:Abstract Nickel aluminum layered double hydroxide (NiAl LDH) with nitrate in its interlayer is investigated as a negative electrode material for lithium-ion batteries (LIBs). The effect of the potential range (i.e., 0.01–3.0 V and 0.4–3.0 V vs. Li + /Li) and of the binder on the performance of the material is investigated in 1 M LiPF 6 in EC/DMC vs. Li. The NiAl LDH electrode based on sodium alginate (SA) binder shows a high initial discharge specific capacity of 2586 mAh g −1 at 0.05 A g −1 and good stability in the potential range of 0.01–3.0 V vs. Li + /Li, which is better than what obtained with a polyvinylidene difluoride (PVDF)-based electrode. The NiAl LDH electrode with SA binder shows, after 400 cycles at 0.5 A g −1 , a cycling retention of 42.2% with a capacity of 697 mAh g −1 and at a high current density of 1.0 A g −1 shows a retention of 27.6% with a capacity of 388 mAh g −1 over 1400 cycles. In the same conditions, the PVDF-based electrode retains only 15.6% with a capacity of 182 mAh g −1 and 8.5% with a capacity of 121 mAh g −1 , respectively. Ex situ X-ray photoelectron spectroscopy (XPS) and ex situ X-ray absorption spectroscopy (XAS) reveal a conversion reaction mechanism during Li + insertion into the NiAl LDH material. X-ray diffraction (XRD) and XPS have been combined with the electrochemical study to understand the effect of different cutoff potentials on the Li-ion storage mechanism. Graphical abstract The as-prepared NiAl-NO 3 − -LDH with the rhombohedral R-3 m space group is investigated as a negative electrode material for lithium-ion batteries (LIBs). The effect of the potential range (i.e., 0.01–3.0 V and 0.4–3.0 V vs. Li + /Li) and of the binder on the material’s performance is investigated in 1 M LiPF 6 in EC/DMC vs. Li. Ex situ X-ray photoelectron spectroscopy (XPS) and ex situ X-ray absorption spectroscopy (XAS) reveal a conversion reaction mechanism during Li + insertion into the NiAl LDH material. X-ray diffraction (XRD) and XPS have been combined with the electrochemical study to understand the effect of different cutoff potentials on the Li-ion storage mechanism. This work highlights the possibility of the direct application of NiAl LDH materials as negative electrodes for LIBs.

Electrochemical study of the LaFe0.8Ni0.2O3 perovskite-type oxide used as anode in nickel-metal hydride batteries

Electrochemical Charge and Discharge Performance of Perovskite-Type Oxide La 1−x Na x FeO 3 (x = 0–0.8) in Alkaline Solution

Enhancing high-voltage performances of nickel-based cathode material via aluminum and progressive concentration gradient modification

Perovskite Structure LaNi0.5Fe0.5O3 Electrocatalyst for Rechargeable Li-O2 Batteries

Electrochemical study of LaGaO3 as novel electrode material of hydrogen battery (Ni/MH)

Surface modification of perovskite‐type oxide LaFeO3 with electroless nickel deposition for application in MH‐Ni batteries

Boosting the high-temperature discharge performance of nickel-hydrogen batteries based on perovskite oxide Co-coated LaFeO3 as proton insertion anode

The structural and electrochemical properties of La2Mg(Ni0.8-xCo0.2Alx)9 (x = 0-0.03) hydrogen storage electrode alloys

Electrochemical study on nickel aluminum layered double hydroxides as high-performance electrode material for lithium-ion batteries based on sodium alginate binder

Enhancing the electrochemical properties of NiFe 2 O 4 anode for lithium ion battery through a simple hydrogenation modification

Influence of over-stoichiometry on hydrogen storage and electrochemical properties of Sm-doped low-Co AB5-type alloys as negative electrode materials in nickel-metal hydride batteries

Electrochemical features of Ce2Ni7-type La0.65Nd0.15Mg0.25Ni3.20M0.10 (M = Ni, Mn and Al) hydrogen storage alloys for rechargeable nickel metal hydride battery

Mesoporous NiO with a Single-Crystalline Structure Utilized As a Noble Metal-Free Catalyst for Non-Aqueous Li–O2 Batteries

Synthetic Optimization and Electrochemical Properties of LiNi_(0.5)Mn_(0.5)O_2 Cathode Materials for Lithium-ion Batteries

High-performance Ni-free sustainable cathode Na0.67Mg0.05Fe0.1Mn0.85O2 for sodium-ion batteries

Development and understanding of the lithiation/de-lithiation mechanism of a low cobalt and nickel-rich cathode material for lithium‐ion batteries

Synthesis and characterization of Li(Li0.23Mn 0.47Fe0.2Ni0.1)O2 cathode material for Li-ion batteries

One-step Synthesis and Effect of Heat-Treatment on the Structure and Electrochemical Properties of LiNi0.5Mn1.5O4 Cathode Material for Lithium-Ion Batteries

A medium-entropy transition metal oxide cathode for high-capacity lithium metal batteries

A Novel Material Li2NiFe2O4: Preparation and Performance As Anode of Lithium Ion Battery

Enhanced Electrochemical Performance of Perovskite LaNiO3 Coating on Li1.2Mn0.54Ni0.13Co0.13O2 As Cathode Materials for Li-ion Batteries