Abstract:The performance of Sr2FeMoO6–σ double perovskites can be significantly enhanced by optimizing the ratio of Fe/Mo as a promising electrode material for solid oxide fuel/electrolysis cells. However, the intrinsic origin is still doubt for the improvement of Sr2FeMoO6–σ sluggish electrocatalytic reaction kinetics. Herein, their electronic structures are investigated by partial replacement of Mo with Fe ions. As the Fe content in Sr2Fe1+xMo1–xO6–δ is increased, its oxidation state increases, which enhances the metal–oxygen hybridization and shifts its bulk O p band energy toward the Fermi level. These electronic and structural variations decrease the O‐vacancy formation and migration energy, which, in turn, facilitates the formation of more oxygen vacancy defects and O ion transport, promoting the full contact between analytes and active B‐site transition metals and also the catalytic reaction kinetics. Consequently, the solid oxide cells with optimized Sr2Fe1.5Mo0.5O6–σ electrodes operating at 800 °C demonstrate high power density of 1.24 W cm−2 using H2 as fuel, and large CO2 electrolysis current density of 1.5 A cm−2 at 1.5 V, which are comparable with those of current state‐of‐the‐art Ni‐based catalysts. The findings provide a new understanding for the origin of the enhanced reaction kinetics of Sr2Fe1+xMo1–xO6–δ serial materials by increasing Fe doping. Partial substitution of Mo by Fe in perovskite of Sr2Fe1+xMo1‐xO6‐δ enhances the metal–oxygen hybridization and shifts up the O p band energy closer to Fermi level, which results in lower O vacancy formation as well as a lower O migration barrier energy, significantly accelerating their catalytic reaction kinetics in H2 oxidation and CO2 reduction reactions in solid oxide cells.

Co-improving the electrocatalytic performance and H 2 S tolerance of a Sr 2 Fe 1.5 Mo 0.5 O 6− δ based anode for solid oxide fuel cells

Electrochemical Performance and Anode Reaction Process for Ca Doped Sr2Fe1·5Mo0·5O6-δ As Electrodes for Symmetrical Solid Oxide Fuel Cells

Enhancing the Performance of Symmetrical Solid Oxide Fuel Cells with Sr2Fe1.5Mo0.5O6-δ Electrodes Via Infiltration of Pr6O11 Bifunctional Catalyst

Enhanced Electrocatalytic Activity and Stability for Symmetrical Solid Oxide Fuel Cells with Praseodymium-Doped SrCo0.2Fe0.8O3-δ Electrodes

Antimony Doping to Greatly Enhance the Electrocatalytic Performance of Sr2Fe1.5Mo0.5O6−δ Perovskite As a Ceramic Anode for Solid Oxide Fuel Cells

Pd-impregnated Sr1.9VMoO6– Double Perovskite As an Efficient and Stable Anode for Solid-Oxide Fuel Cells Operating on Sulfur-Containing Syngas

Unraveling the Enhanced Kinetics of Sr 2 Fe 1+ x Mo 1‐ x O 6‐δ Electrocatalysts for High‐Performance Solid Oxide Cells

Tailoring Sr2Fe1.5Mo0.5O6−δ with Sc as a new single-phase cathode for proton-conducting solid oxide fuel cells

Optimization of Pt Infiltrated Sr2Fe2-xMoxO6-δ-Ce0.8Sm0.2O1.9 Oxygen Electrode for Reversible Solid Oxide Cell and CH4-assisted Electrolysis Process

Theoretical investigation of H2 oxidation on the Sr2Fe(1.5)Mo(0.5)O6 (001) perovskite surface under anodic solid oxide fuel cell conditions

Sr2Fe1.5Mo0.5O6−δ- Sm0.2Ce0.8O1.9Composite Anodes for Intermediate-Temperature Solid Oxide Fuel Cells

Synthesis and Evaluation of Ca-doped Sr2Fe1.5Mo0.5O6-δ As Symmetrical Electrodes for High Performance Solid Oxide Fuel Cells

In 3+ -Doped Sr 2 Fe 1.5 Mo 0.5 O 6− Δ Cathode with Improved Performance for an Intermediate-Temperature Solid Oxide Fuel Cell

High-Performance Sr0.95Fe0.8Mo0.1Ni0.1O3−δ Electrode for Reversible Symmetrical Solid Oxide Cells

Suspension Plasma Sprayed Sr 2 Fe 1.4 Mo 0.6 O 6− Δ Electrodes for Solid Oxide Fuel Cells

High-performance SOFCs with Impregnated Sr2Fe1.5Mo0.5O6-δ Anodes Toward Sulfur Resistance

Electrochemical Performance of Symmetric Solid Oxide Cells Employing a Sc-doped SrFeO3-δ-based Electrode

Advanced Ru‐Infiltrated Perovskite Oxide Electrodes for Boosting the Performance of Syngas Fueled Solid Oxide Fuel Cell

A highly active and carbon-tolerant anode decorated with in situ grown cobalt nano-catalyst for intermediate-temperature solid oxide fuel cells

Efficient bifunctional electrocatalysts for solid oxide cells based on the structural evolution of perovskites with abundant defects and exsolved CoFe nanoparticles

Rational Design of Perovskite-based Anode with Decent Activity for Hydrogen Electro-oxidation and Beneficial Effect of Sulfur for Promoting Power Generation in Solid Oxide Fuel Cells.