In situ self-reconstructed nanoparticle-coated cathode and anode by nitric acid etching for symmetric solid oxide fuel cells
Xuzhuo Sun,Yunyun Xia,Bo Wang,Bo Li,Lushan Ma,Jing Chen,Bo Chi
DOI: https://doi.org/10.1016/j.cej.2023.147598
IF: 15.1
2023-11-27
Chemical Engineering Journal
Abstract:In this study, we developed an innovative strategy to fabricate highly active cathode and anode materials by acid etching perovskite oxide (ABO 3 ) powder. (Co x Fe 1-x ) 3 O 4 nanoparticles were exsoluted in situ on an etched Pr 0.2 Sr 0.8 Co 0.2 Fe 0.8 O 3-δ (P 0.2 SCF) catalyst to reconstruct heterojunctions in air. As a result, the exsolution of (Co x Fe 1-x ) 3 O 4 nanoparticles on the P 0.2 SCF surface led to the formation of perovskite-spinel interfaces in the cathode, and the generation of CoFe alloy and CoO nanoparticles embedded on the surface of the anode in 5 % H 2 . Two new composite catalysts modified with nanoparticles on the P 0.2 SCF skeleton were simultaneously prepared through the in situ exsolution of perovskite. At 850 °C, the polarization resistance values of the anode and cathode decreased by 37 % and 57 %, respectively. Furthermore, in a single cell with LSGM electrolyte and P 0.2 SCF-30-GDC symmetrical electrodes, we achieved a maximum power density of 692 mW/cm 2 at 850 °C under wet H 2 conditions, demonstrating good electrochemical output performance. The proposed catalyst design, which employed acid etching, was not only suitable for the optimization of symmetrical solid oxide fuel cell (SSOFC) electrodes, but also for the application in other types of catalysis, providing the potential for improving the electro-catalytic activity of perovskite electrodes.
engineering, chemical, environmental