Abstract:Solid oxide fuel cell (SOFC) has experienced a growing interest in the last few decades because of generating energy more efficiently than the conventional combustion of fossil fuels. By using the same material as anode and cathode of symmetric solid oxide fuel cell (SSOFC), the production of reliable and repeatable cells would be simpler. In this work, La0.4Sr0.6Co0.2Fe0.7Nb0.1O3-δ (LSCFN) has been investigated firstly as potential cathode material for SOFC. The cathode polarization resistances are only 0.1 Ω cm2 at 800 oC. The stability of phase structure, electrode microstructure and polarization resistances for the LSCFN in the atmosphere of air have been studied. Then, LSCFN have been investigated as potential anode material for SOFC. The results show that LSCFN have high catalytic activity in methane catalytic combustion reaction, the total conversion temperature of 1% CH4 using LSCFN as catalyst was as low as 650 oC. The performance of carbon-resistance and sulfur-tolerance in SOFC were studied using LSCFN ceramic anode with La0.8Sr0.2Ga0.83Mg0.17O3-δ (LSGM) electrolyte. Long-term operation of such single cell under methane lasted for 120 hours without degradation. The output power density fueled with H2-50 ppm H2S was stable enough in 120 hours’ operation which indicated a good sulfur-tolerant performance. Finally, the maximum power densities generated by the SSOFC cell with LSCFN electrode are 650 mW cm-2 in H2, and the cell maximum power output has demonstrated to be not affected by the redox cycling of the anode during a total of 21 cyclic testing, indicating that the LSCFN has excellent redox stability. All of these results indicate that LSCFN can potentially be a promising candidate for the electrode material of SSOFC.

A New Sodium-ion-conducting Layered Perovskite Oxide As Highly Active and Sulfur Tolerant Electrocatalyst for Solid Oxide Fuel Cells

Low-temperature Solid Oxide Fuel Cells with Novel La0.6Sr0.4Co0.8Cu0.2O3−δ Perovskite Cathode and Functional Graded Anode

Core-Shell Structured Li0.33la0.56tio3 Perovskite As A Highly Efficient And Sulfur-Tolerant Anode For Solid-Oxide Fuel Cells

Rational Design of Perovskite-based Anode with Decent Activity for Hydrogen Electro-oxidation and Beneficial Effect of Sulfur for Promoting Power Generation in Solid Oxide Fuel Cells.

Rational Design of a Water‐Storable Hierarchical Architecture Decorated with Amorphous Barium Oxide and Nickel Nanoparticles As a Solid Oxide Fuel Cell Anode with Excellent Sulfur Tolerance

Sulfur-tolerant Fe-doped La0·3Sr0·7TiO3 perovskite as anode of direct carbon solid oxide fuel cells

Nickel-Iron Alloy Nanoparticle-Decorated K2NiF4-Type Oxide as an Efficient and Sulfur-Tolerant Anode for Solid Oxide Fuel Cells

Exsolved Alloy Nanoparticles Decorated Ruddlesden–Popper Perovskite As Sulfur-Tolerant Anodes for Solid Oxide Fuel Cells

Molybdenum-based Double Perovskites A2CrMoO6− (A = Ca, Sr, Ba) As Anode Materials for Solid Oxide Fuel Cells

A High-Performing Sulfur-Tolerant and Redox-Stable Layered Perovskite Anode for Direct Hydrocarbon Solid Oxide Fuel Cells

Tuning Layer-Structured La0.6sr1.4mno4+Delta Into A Promising Electrode For Intermediate-Temperature Symmetrical Solid Oxide Fuel Cells Through Surface Modification

Coking-Resistance and Sulfur-Tolerance Study of La0.4Sr0.6Co0.2Fe0.7Nb0.1O3-δ Anode

Highly carbon– and sulfur–tolerant Sr2TiMoO6−δ double perovskite anode for solid oxide fuel cells

Pd-impregnated Sr1.9VMoO6– Double Perovskite As an Efficient and Stable Anode for Solid-Oxide Fuel Cells Operating on Sulfur-Containing Syngas

Applying multifunctional perovskite LaNiO3 as electrolyte and anode for low‐temperature solid oxide fuel cell

Advanced Symmetric Solid Oxide Fuel Cell With An Infiltrated K2nif4-Type La2nio4 Electrode

A Highly Oxygen Reduction Reaction Active and CO2 Durable High-entropy Cathode for Solid Oxide Fuel Cells

A High Performance Ni-Free Redox Reversible Ceramic Anode R-La0.5Sr0.5Fe0.8Cu0.1Ti0.1O3-δ for Intermediate Temperature Solid Oxide Fuel Cells

Nano La0.6ca0.4fe0.8ni0.2o3-Delta Decorated Porous Doped Ceria As A Novel Cobalt-Free Electrode For "Symmetrical" Solid Oxide Fuel Cells

An A-Site-Deficient Perovskite Offers High Activity And Stability For Low-Temperature Solid-Oxide Fuel Cells

Enhanced oxygen reduction reaction activity and electrochemical performance of A-site deficient (La0.6Sr0.4)1-xFe0.8Ni0.2O3−δ cathode for solid oxide fuel cells