Abstract:Additive manufacturing using metal powders is becoming increasingly popular due to its versatility in creating structural components of various shapes. Among the various additive manufacturing methods (or 3D printing), direct metal laser sintering (DMLS) is one of the most frequently used technologies. The material most frequently used in DMLS technology is the titanium (Ti 6 Al 4 V) alloy, widely preferred in defense, aerospace, automotive, energy, and biomedical industries. This research study examines the mechanical and surface porosity and roughness properties of the 3D-printed Ti 6 Al 4 V (Grade 23) alloy specimens. In addition to additive manufacturing, a post-processing treatment known as stress-relieving (SR) heat treatment is also utilized for additively manufactured specimens. Four differently shaped walls (diamond, square, circle, and hexagon) were additively manufactured. The mechanical properties of the 3D-printed Ti 6 Al 4 V alloy specimens were tested using compression testing and hardness tests using Rockwell and Vickers scales. These tests were conducted before and after post-process SR heat treatment. Additionally, surface roughness analysis was conducted on the specimens to determine any changes in the material's surface properties after the SR heat treatment. It was observed that the heat-treated (HT) specimens existed to have more cracks and oxidation compared to the non-heat-treated (NHT) ones. According to the surface roughness results, the circular-shaped heat-treated wall (CSHTW) specimen has the lowest average roughness (Ra) value of 210.31 μin (5.34 μm), and the corresponding maximum height (Rz) was 897.99 μin (22.81 μm). Also, the average Rockwell hardness value of the HT specimens was reported to present an increase of approximately 3% compared to the NHT specimens. The diamond-shaped heat-treated wall (DSHTW) specimen exhibited the highest Vickers hardness value of 605.08 (± 233.98) HV. It was found that the CSHTW specimens had the highest elastic modulus and yield strengths among all the geometries, with a value 38 GPa and 1380 MPa, respectively, indicating that they could resist deformation better than the other specimens. Overall, this study is important because additively manufactured Ti 6 Al 4 V alloy components are increasingly used in many industries, as it offers significant reductions in costs, material waste, manufacturing lead times, and improved performance outcomes.

Role of laser remelting and heat treatment in mechanical and tribological properties of selective laser melted Ti6Al4V alloy

The effect of laser surface re-melting on the surface roughness and micro-hardness of selective laser melting (SLM) fabricated Ti-6Al-4V samples

Effect of Overlapping Remelting on Microstructures and Mechanical Properties of Selective Laser‐Melted Ti‐6Al‐4V Alloy

In-situ Study of Microstructure and Mechanical Properties of GH3536 Alloy Manufactured by Selective Laser Melting at 750 °C

Effect of Subtransus Heat Treatment on the Microstructure and Mechanical Properties of Additively Manufactured Ti-6Al-4V Alloy

Effect of Heat Treatment on Microstructure and Mechanical Properties of Ti6Al4V Alloy Fabricated by Selective Laser Melting

Effect of Laser Remelting on Deposition Quality, Residual Stress, Microstructure, and Mechanical Property of Selective Laser Melting Processed Ti-5Al-2.5Sn Alloy

Improvement of tribological performance by micro-arc oxidation treatment on selective laser melting Ti6Al4V alloy

The effect of a remelting treatment scanning strategy on the surface morphology, defect reduction mechanism, and mechanical properties of a selective laser-melted Al-based alloy

Effects of remelting on the surface morphology, microstructure and mechanical properties of AlSi10Mg alloy fabricated by selective laser melting

Surface Roughness Improvement by Sliding Friction Burnishing of Parts Produced by Selective Laser Melting of Ti6Al4V Titanium Alloy

The impact of heat treatment on microstructure, residual stress, and mechanical behavior of laser powder bed fusion additively manufactured Ti–6Al–2Sn–4Zr–2Mo alloy

Tensile Behavior of Ti-6Al-4V Alloy Fabricated by Selective Laser Melting: Effects of Microstructures and As-Built Surface Quality

Fatigue properties of selective laser melted Ti-6Al-4V alloy subjected to laser shock processing

Microstructural, Mechanical, and Tribological Evolution under Different Heat Treatment Conditions of Inconel 625 Alloy Fabricated by Selective Laser Melting

Heat-treatment induced microstructural evolution and enhanced mechanical property of selective laser melted near β Ti-5Al-5Mo-5 V-3Cr-1Zr alloy

Investigation on influence of selective laser melting parameters on mechanical properties of Ti-6Al-4V alloy

Machining properties of as-built additive manufactured Ti6Al4V titanium alloy through selective laser melting: a comprehensive investigation

Effects of heat treatment and hot isostatic pressing on microstructure and fatigue improvements in Ti-6Al-4V alloy fabricated by selective laser melting

Processing Parameter Effects on Residual Stress and Mechanical Properties of Selective Laser Melted Ti6Al4V

Investigating mechanical and surface porosity values of high-performing 3D-printed titanium alloys along with stress-relieving heat treatments