Abstract:Additive manufacturing using metal powders is becoming increasingly popular due to its versatility in creating structural components of various shapes. Among the various additive manufacturing methods (or 3D printing), direct metal laser sintering (DMLS) is one of the most frequently used technologies. The material most frequently used in DMLS technology is the titanium (Ti 6 Al 4 V) alloy, widely preferred in defense, aerospace, automotive, energy, and biomedical industries. This research study examines the mechanical and surface porosity and roughness properties of the 3D-printed Ti 6 Al 4 V (Grade 23) alloy specimens. In addition to additive manufacturing, a post-processing treatment known as stress-relieving (SR) heat treatment is also utilized for additively manufactured specimens. Four differently shaped walls (diamond, square, circle, and hexagon) were additively manufactured. The mechanical properties of the 3D-printed Ti 6 Al 4 V alloy specimens were tested using compression testing and hardness tests using Rockwell and Vickers scales. These tests were conducted before and after post-process SR heat treatment. Additionally, surface roughness analysis was conducted on the specimens to determine any changes in the material's surface properties after the SR heat treatment. It was observed that the heat-treated (HT) specimens existed to have more cracks and oxidation compared to the non-heat-treated (NHT) ones. According to the surface roughness results, the circular-shaped heat-treated wall (CSHTW) specimen has the lowest average roughness (Ra) value of 210.31 μin (5.34 μm), and the corresponding maximum height (Rz) was 897.99 μin (22.81 μm). Also, the average Rockwell hardness value of the HT specimens was reported to present an increase of approximately 3% compared to the NHT specimens. The diamond-shaped heat-treated wall (DSHTW) specimen exhibited the highest Vickers hardness value of 605.08 (± 233.98) HV. It was found that the CSHTW specimens had the highest elastic modulus and yield strengths among all the geometries, with a value 38 GPa and 1380 MPa, respectively, indicating that they could resist deformation better than the other specimens. Overall, this study is important because additively manufactured Ti 6 Al 4 V alloy components are increasingly used in many industries, as it offers significant reductions in costs, material waste, manufacturing lead times, and improved performance outcomes.

Machining properties of as-built additive manufactured Ti6Al4V titanium alloy through selective laser melting: a comprehensive investigation

Experimental Investigation of the Micro-Milling of Additively Manufactured Titanium Alloys: Selective Laser Melting and Wrought Ti6Al4V

Study on machinability characteristics of novel additive manufactured titanium alloy (Ti-6Al-4V) fabricated by direct metal laser sintering

Tensile Behavior of Ti-6Al-4V Alloy Fabricated by Selective Laser Melting: Effects of Microstructures and As-Built Surface Quality

Microstructure and Mechanical Properties of As-Built Ti-6Al-4V and Ti-6Al-7Nb Alloys Produced by Selective Laser Melting Technology

Effect of Heat Treatment on Microstructure and Mechanical Properties of Ti6Al4V Alloy Fabricated by Selective Laser Melting

The State of the Art in Machining Additively Manufactured Titanium Alloy Ti-6Al-4V

Role of laser remelting and heat treatment in mechanical and tribological properties of selective laser melted Ti6Al4V alloy

Additive manufacturing of titanium alloys via selective laser melting: Fabrication, microstructure, post-processing, performance and prospect

Microstructure and Mechanical Properties of Ti-6Al-4V Manufactured by Selective Laser Melting after Stress Relieving, Hot Isostatic Pressing Treatment, and Post-Heat Treatment

Additive manufacturing of Ti-6Al-4V alloy- A review

Microstructure–Texture–Mechanical Property Relationship in Alloys Produced by Additive Manufacturing Following Selective Laser Melting (SLM) Technique

Cutting-Edge Additive Manufacturing Technology for Titanium-Based Alloys

Microstructural, mechanical and in vitro biological properties of Ti6Al4V-5Cu alloy fabricated by selective laser melting

Mechanical Behavior of Additive Manufacturing (AM) and Wrought Ti6Al4V with a Martensitic Microstructure

Effect of Overlapping Remelting on Microstructures and Mechanical Properties of Selective Laser‐Melted Ti‐6Al‐4V Alloy

Investigation on influence of selective laser melting parameters on mechanical properties of Ti-6Al-4V alloy

Comparison of AlSi7Mg0.6 alloy obtained by selective laser melting and investment casting processes: Microstructure and mechanical properties in as-built/as-cast and heat-treated conditions

Machinability performance and mechanism in milling of additive manufactured Ti6Al4V with polycrystalline diamond tool

Selective Laser Melting Process Optimization and Mechanical Properties Evolution of AlSi10Mg by Determining Temperature of the Build Chamber using Arduino IDE and Coding Algorithm

Investigating mechanical and surface porosity values of high-performing 3D-printed titanium alloys along with stress-relieving heat treatments