Abstract:Solid-oxide fuel cells (SOFCs) technology has a substantial potential in the application of clean and efficient electric power generation. However, the widespread utilization of SOFCs has not been realized because the cost associated with cell fabrication, materials and maintenance is still too high. To increase its competitiveness, lowering the operation temperature to the intermediate range of around 500–800°C is one of the main goals in current SOFCs research. A major challenge is the development of cell materials with acceptably low ohmic and polarization losses to maintain sufficiently high electrochemical activity at reduced temperatures. During the past few decades, tremendous progress has been made in the development of cell materials and stack design, which have been recently reviewed. SOFCs are fabricated from ceramic or cermet powders. The performances of SOFCs are also closely related to the ways in which the cell materials are processed. Therefore, the optimization of synthetic processes for such materials is of great importance. The conventional solid-phase reaction method of synthesizing SOFCs materials requires high calcination and sintering temperatures, which worsen their microstructure, consequently, their electrochemical properties. Various wet chemical routes have recently been developed to synthesize submicro- to nano-sized oxide powders. This paper provides a comprehensive review on the advanced synthesis of materials for intermediate-temperature SOFCs and their impact on fuel cell performance. Combustion, co-precipitation, hydrothermal, sol–gel and polymeric-complexing processes are thoroughly reviewed. In addition, the parameters relevant to each synthesis process are compared and discussed. The effect of different processes on the electrochemical performance of the materials is evaluated and optimization of the synthesis processes is discussed and some emerging synthetic techniques are also briefly presented.

Fabrication Methods and Performance in Fuel Cell and Steam Electrolysis Operation Modes of Small Tubular Solid Oxide Fuel Cells: A Review

Fabrication Techniques and Stack Assembling Methods for Micro Tubular Solid Oxide Fuel Cells

Experimental Study on High-Efficiency Microtubular Solid Oxide Fuel Cell Stacks Using Various Fuels

From Concept to Commercialization: A Review of Tubular Solid Oxide Fuel Cell Technology

Micro solid oxide fuel cells: a new generation of micro-power sources for portable applications

A Review On Recent Advances In Micro-Tubular Solid Oxide Fuel Cells

Fabrication and Characterization of High Performance Intermediate Temperature Micro-Tubular Solid Oxide Fuel Cells

Electrochemical Properties of Tubular SOFC Based on a Porous Ceramic Support Fabricated by Phase-Inversion Method

The Progress on Research and Development of Tubular Solid Oxide Fuel Cell Stacks

Theoretical Studies on the Electrochemical and Mechanical Properties and Microstructure Optimization of Micro-Tubular Solid Oxide Fuel Cells

Advanced synthesis of materials for intermediate-temperature solid oxide fuel cells

Component fabrication techniques for solid oxide fuel cell (SOFC) – A comprehensive review and future prospects

Research Progress of Anode-Supported Micro-Tubular Solid Oxide Fuel Cells

Design and Fabrication of an Easily Assembled Anode Supported Microtubular SOFC Stack

Fabrication of nanoscale yttria stabilized zirconia for solid oxide fuel cell

Nanostructured Materials for Enhanced Performance of Solid Oxide Fuel Cells: A Comprehensive Review

Recent progresses in the development of tubular segmented-in-series solid oxide fuel cells: Experimental and numerical study

Fabrication and Characterization of a Small Tubular Solid Oxide Fuel Cell with the La0.43Ca0.37Ni0.06Ti0.94O3-γ Anode

Fabrication of Low-Temperature Solid Oxide Fuel Cells via Development of Magnetron Sputtering Process

Micro-Tubular Solid Oxide Fuel Cells with Graded Anodes Fabricated with A Phase Inversion Method

Advances in Ceramic Thin Films Fabricated by Pulsed Laser Deposition for Intermediate-Temperature Solid Oxide Fuel Cells