Abstract:Obtaining the morphology of two-phase flow field accurately through experiments is very challenging, due to the complexity and the drainage area diversity of particle–fluid two-phase flow. Depending on the particle concentration, size, flow velocity, and so on, the two-phase flow tends to be in a more complex form, known as coupled flow status. Crystallisation process within a crystalliser is a typical engineering application of particle–fluid two-phase flow, and hence, the flow field within a potassium salt crystallizer is implemented to simulate the crystal suspension and to mix flow state during a continuous crystallisation process. Because the two-fluid model treats the particle phase and fluid phase as two distinct continuous media, this simulation model takes the effect of virtual mass force into considerations. The enhanced two-fluid model is then applied to investigate the influencing factors of the coupled flow field between the potassium salt particles and the fluid in the crystalliser under various operating conditions. The results indicated that the stirring speed, the concentration of the feed particles, and the particle size affected the distribution of coupled flow field at different levels and, thus, affected the crystallisation phenomena of a potassium salt. Among those factors, the stirring speed appears to have the most obvious effect on the flow field, as it affects the velocity of the two-phase flow. In the conditions listed in this paper, the minimum stirring speed is roughly 50 rpm to form a stable and circular flow field in the crystallizer, and the maximum particle size is controlled at around 12 mm and the feed particle concentration of roughly 32% to ensure cyclic crystallization. The research method used in this article provides a baseline for the study of the coupled flow field of particle–fluid two-phase flow and its influencing factors. This research also states theoretical guidance for the optimisation of operating conditions in the production and application of potassium salt crystallizer.

Numerical Simulation of Flow Process of Ammonium Persulfate Crystallizer

Optimizing Flow Field in an SCR System of a 600 MW Power Plant: Effects of Static Mixer Alignment Style

Numerical Simulation of Mixing Process in Industry Crystallizer

Simulation of Flow Field and Optimization on Structure for a Crystallizer

NUMERICAL SIMULATION AND ANALYSIS OF FLOW IN A DTB CRYSTALLIZER

Numerical Stimulation of the Crystallization Fouling Process of Multi-Stage Flash Desalination

CFD simulation and experimental validation for an industrial crystallizer of potassium chloride

CFD simulation of circulation flow caused by jet in DTB crystallizer

Implementing a one-dimensional quick model for dynamic simulation and economic analysis of a forced circulation crystallizer

Numerical simulation of struvite crystallization in fluidized bed reactor

CFD-DEM simulations of a fluidized bed crystallizer

Analysis of Multiphase Flow and Heat and Mass Transfer for Ammonium Chloride Crystallization of the High-Pressure Heat Exchanger in Hydrogenation Unit

Simulation study of particle–fluid two-phase coupling flow field and its influencing factors of crystallization process

Influence of Oslo crystallizer structure characteristics on crystallization process

Optimization Design for DTB Industrial Crystallizer of Potassium Chloride

Optimization of an Oscillatory Flow Crystallizer Based on Heat Transfer and Supersaturation Distribution

Numerical investigation of hydrodynamics and crystal growth in a forced circulation crystallizer

Coupled Computational Fluid Dynamics–Discrete Element Method Simulations of a Pilot-Scale Batch Crystallizer

Application of Vapor Crystallization Model to Synthesis of Ammonium Bifluoride

Simulation of a batch crystallizer using a multi-scale approach in time and space