Abstract:Optical crystals grown by Czochralski technique from a solute-rich melt usually suffer defects of melt inclusion or bubble core defects, which severely affect the optical, thermal and mechanical properties of the material. It is well known that the formation of melt inclusion or bubble core is highly related to species distribution in the growth system especially at the solidification interface and the shape of the growth interface. This paper has examined the flow pattern and solidification interface changes by changing the forced convection, e.g., crystal rotation and by changing the natural convection, e.g., inserting a horizontal disk plate. The relative effect of fluid-flow convection modes in the melt associated with crystal rotation rate is represented by a dimensionless parameter, Gr/Re-2. Increasing the rotation rate will cause the solid-liquid interface change from the convex shape to concave. When the crystal rotation rate is relatively low and natural convection is strong, Gr/Re-2 is large. In this case, the concentration of species pertinent to melt inclusion moves down along the axis of rotation. When the crystal rotation rate is increased, the value of Gr/Re-2 decreases. The precipitated composition spreads over the growing interface may then be swiped away from the growth interface by increased crystal rotation. Melt inclusion-free crystals can thus be obtained. The relationship between Gr/Re-2 and growth interface shape change is achieved by numerical simulations. The stagnant point location as a function of crystal rotation is also presented, which shows that the stagnant point moves outward by increasing Reynolds number and/or reducing Grashof number. From such understanding, the interface shape and melt inclusion position can then be controlled through control of Gr/Re-2 in the growth system. Many times, it is, however, not practical in the experiments to use a high rotation rate for optical crystal growth since high rotation rate will introduce the striation defects. A new design to reduce natural convection is then proposed to improve the effect of crystal rotation and to control the solidification interface shape. Numerical simulations have been performed to demonstrate the possibility of the new design. Results show that such design is very effective and practical to control the melt inclusion and the solidification interface shape.

Influence of Oslo crystallizer structure characteristics on crystallization process

Implementing a one-dimensional quick model for dynamic simulation and economic analysis of a forced circulation crystallizer

Numerical investigation of hydrodynamics and crystal growth in a forced circulation crystallizer

Numerical Simulation of Flow Process of Ammonium Persulfate Crystallizer

CFD-DEM simulations of a fluidized bed crystallizer

NUMERICAL SIMULATION AND ANALYSIS OF FLOW IN A DTB CRYSTALLIZER

Simulation of a batch crystallizer using a multi-scale approach in time and space

Multiscale Modeling and Simulation of Macromixing, Micromixing, and Crystal Size Distribution in Radial Mixers/Crystallizers

Experimental and CFD Analysis of Hydrodynamics in Dual-Impeller Crystallizer at Different Off-Bottom Clearances

Coupled Computational Fluid Dynamics–Discrete Element Method Simulations of a Pilot-Scale Batch Crystallizer

Control of Crystal Size Distribution using Non-Isothermal Taylor Vortex Flow

Interplay of Particle Suspension and Residence Time Distribution in a Taylor–Couette Crystallizer

Optimal Operation of an Oscillatory Flow Crystallizer: Coupling Disturbance and Stability

Influence of Glass-Lined V-Shaped Stirrers on Crystallization Properties

Optimization design of cane sugar evaporative crystallizer based on orthogonal test and computational fluid dynamics

Assessments of the heat transfer performance of a novel continuous oscillatory baffled crystallizer via two-fluid model

Control Of Flow Pattern And Solidification Interface Shape In An Induction Heated Czochralski Crystal Growth System

Evaporation with Salt Crystallization in Capillaries of Different Cross Sections

Batch Cooling Crystallization in Non-Isothermal Taylor Vortex Flow: Effective Method for Controlling Crystal Size Distribution

Numerical analysis of thermohydraulic behavior in a directional solidification furnace