Abstract:Stirred tanks are widely used in many industrial processes.In this paper,the mixing process of industry crystallizer was simulated three-dimensionally by computational fluid dynamics(CFD).The multi-reference frame(MRF) and standard k-e turbulent model were used in the simulation to analyze the effect of the propeller structure,rotational speed and the distance of impeller location on the flow field in the crystallizer.The simulation results show that the velocity distributes mainly on the area in the interior draft tube and between the interior and exterior draft tube.Therefore,according to the notable difference of velocity at different areas,the crystallizer can be divided into approximately two zones based on the different effects in the flow processes of crystallization:the cycle zone with high velocity speed inside the draft tube and the sedimentation zone with low velocity speed outside the draft tube.Through comparison of velocity contour between cycle zone and sedimentation zone,propeller is proved to be more suitable than others,and the best distance of impeller location in the system is from 3.5 m to 5.7 m.The uniform velocity rate of fluid flow upward at the sedimentation zone engendered through the appropriate rotational speed can bring out the small crystals and is favorable for large particle size products.The detailed flow field in the stirred tank and different operation parameters can provide theoretical guidance to optimize the structure and operation parameter in the industrial scale.The industrial results show that the product particle size has been significantly increased,and the proportion of particles more than 0.2 mm increases from less than 50% to more than 90%.Natural gas consumption for drying products is decreased from 22 m~3/t to 15 m~3/t.The energy is remarkable saved.

Implementing a one-dimensional quick model for dynamic simulation and economic analysis of a forced circulation crystallizer

Numerical investigation of hydrodynamics and crystal growth in a forced circulation crystallizer

Numerical Simulation of Mixing Process in Industry Crystallizer

Steady state modeling and simulation of an industrial sugar continuous crystallizer

Optimizing forced circulation crystallizer performance in zero discharge desalination using artificial neural networks

Digital Design of an Agrochemical Crystallization Process via Two-Dimensional Population Balance Modeling

Simulation of Flow Field and Optimization on Structure for a Crystallizer

Numerical Simulation of Flow Process of Ammonium Persulfate Crystallizer

Simulation of a batch crystallizer using a multi-scale approach in time and space

NUMERICAL SIMULATION AND ANALYSIS OF FLOW IN A DTB CRYSTALLIZER

Influence of Oslo crystallizer structure characteristics on crystallization process

CFD simulation and experimental validation for an industrial crystallizer of potassium chloride

Optimization of an Oscillatory Flow Crystallizer Based on Heat Transfer and Supersaturation Distribution

CFD-DEM simulations of a fluidized bed crystallizer

Optimization Design for DTB Industrial Crystallizer of Potassium Chloride

Computational fluid dynamics simulation of a jet crystallizer for continuous crystallization of lovastatin

Modeling and dynamic simulation of batch crystallization process

Numerical Stimulation of the Crystallization Fouling Process of Multi-Stage Flash Desalination

Coupled Computational Fluid Dynamics–Discrete Element Method Simulations of a Pilot-Scale Batch Crystallizer

Recovering nutrients from wastewater treatment plants through struvite crystallization: CFD modelling of the hydrodynamics of UBC MAP fluidized-bed crystallizer