Abstract:Accelerated bridge construction, with innovative connection details and construction technologies, has been extensively investigated and put into practical application for years. Nowadays, there are three commonly used connection methods of accelerated bridge construction technology, namely, lap‐spliced connection, sleeve connection, and socket connection. Due to the convenience of construction and lower requirements of construction accuracy, the socket connection is more suitable for reconstruction and expansion projects of traffic infrastructure, which could minimize the impact on traffic and accelerate construction progress. According to the structural characteristics of the socket connection, there are some design parameters that may significantly affect the seismic resistance of the structure, such as socket embedment length, fabrication of the shear key, and grouting material strength. To fully study the influence of different design parameters on structural performance, an experiment was carried out to investigate the seismic behavior of the precast pier‐footing socket connections with different design parameters. Five 1:2 scale reinforced concrete precast pier‐footing socket connection specimens with different design parameters were designed and tested under cyclically reversed horizontal loads. The development of hysteresis features, failure mode, load‐bearing capacity, stiffness degradation, structural ductility, energy dissipation capacity, and residual drift are analyzed to reveal the influence of the different design parameters on the seismic behavior of the precast pier‐footing socket connection. The seismic behavior of the precast pier‐footing socket connection was significantly influenced by the embedment length especially when the embedment length was less than 1.0bc. When the embedment length was 0.5bc, the failure mode changed from bending damage at the bottom of the precast pier to the anchorage failure of the precast pier‐footing socket connection. When the embedment length was 1.5bc, the fabrication of the shear key had limited improvement on the seismic performance of the specimen, while reducing the ductility of the specimen. When the embedment length was 1.0bc, the grouting material with a strength grade of C60 could be used in the socket connection between the precast pier and footing. The research presented in this paper provides some design suggestions and a technical basis for evaluating the seismic behavior of precast pier‐footing structures with socket connection.

An Experimental Study on a Newly Proposed Connection Between a Steel Pier Base and a Cast-in-Place Pile with Manual Excavation for the Construction of Takaracho On-Ramp Viaduct at the Tokyo Metropolitan Expressway

Experimental Studies on Precast Prestressed Concrete Pile to Cip Concrete Pile-Cap Connections

Experimental Studies on Seismic Behavior of Steel Pile-to-Pile-Cap Connections

Construction Techniques for Reinforcement of Foundation of Existing Bridge Pile with Microsteel-Piped Pile

Behavior of Model Steel H-Pile-To-Pile-Cap Connections

Improved Seismic Design Using Bolted End Plate Connections For Steel Reinforced Concrete Composite Structures

Investigation of the Tensile Properties of High-Strength Bolted Joints in Static Drill Rooted Nodular Piles

Caisson-Bored Pile Composite Anchorage Foundation for Long-Span Suspension Bridge: Feasibility Study and Parametric Analysis

AN EXPERIMENTAL STUDY ON SEISMIC RETROFITTING METHOD OF REINFORCED CONCRETE BRIDGE PIERS WITH A CONTINUOUS FIBER ROPE

Experimental and Numerical Investigation on Pile Foundation Underpinning Structure System in Urban Overpass

Development of partial factor design method on bearing capacity of pile foundations for Japanese Specifications for Highway Bridges

Analysis of cast-in-situ tubular piles in soft foundation improvement at bridge approaches

Precast segmental piers: testing, modeling and seismic assessment of an emulative connection based on a grouted central tenon

Experimental and numerical study of precast bridge piers with a new UHPC socket column-footing connection

Experimental Study on Steel Jacket–Concrete Composite Connections

EVALUATION OF ULTIMATE BENDING STRENGTH AND DEFORMATION CAPACITY AT CONCRETE FILLED PART OF STEEL PIPE PILE

Experimental investigation of seismic behavior of precast pier‐footing socket connection with different design parameters

Experimental Study on Direct-Shear Behaviour of Narrow Joints in Socket Connections for Precast Pier-to-pile Footing Systems

Structural performance at the joint of precast pile-supported pier structure

Cyclic Loading Test and Numerical Modeling on Prefabricated UHPC Tube-Confined Rectangular Bridge Piers with Different Base Connections