Abstract:Accelerated bridge construction, with innovative connection details and construction technologies, has been extensively investigated and put into practical application for years. Nowadays, there are three commonly used connection methods of accelerated bridge construction technology, namely, lap‐spliced connection, sleeve connection, and socket connection. Due to the convenience of construction and lower requirements of construction accuracy, the socket connection is more suitable for reconstruction and expansion projects of traffic infrastructure, which could minimize the impact on traffic and accelerate construction progress. According to the structural characteristics of the socket connection, there are some design parameters that may significantly affect the seismic resistance of the structure, such as socket embedment length, fabrication of the shear key, and grouting material strength. To fully study the influence of different design parameters on structural performance, an experiment was carried out to investigate the seismic behavior of the precast pier‐footing socket connections with different design parameters. Five 1:2 scale reinforced concrete precast pier‐footing socket connection specimens with different design parameters were designed and tested under cyclically reversed horizontal loads. The development of hysteresis features, failure mode, load‐bearing capacity, stiffness degradation, structural ductility, energy dissipation capacity, and residual drift are analyzed to reveal the influence of the different design parameters on the seismic behavior of the precast pier‐footing socket connection. The seismic behavior of the precast pier‐footing socket connection was significantly influenced by the embedment length especially when the embedment length was less than 1.0bc. When the embedment length was 0.5bc, the failure mode changed from bending damage at the bottom of the precast pier to the anchorage failure of the precast pier‐footing socket connection. When the embedment length was 1.5bc, the fabrication of the shear key had limited improvement on the seismic performance of the specimen, while reducing the ductility of the specimen. When the embedment length was 1.0bc, the grouting material with a strength grade of C60 could be used in the socket connection between the precast pier and footing. The research presented in this paper provides some design suggestions and a technical basis for evaluating the seismic behavior of precast pier‐footing structures with socket connection.

Experimental Study on Direct-Shear Behaviour of Narrow Joints in Socket Connections for Precast Pier-to-pile Footing Systems

Experimental Studies on Precast Prestressed Concrete Pile to Cip Concrete Pile-Cap Connections

Experimental investigation of seismic behavior of precast pier‐footing socket connection with different design parameters

Experimental study on the shear behavior of joints in precast concrete segmental foundations

The Direct Shear Behavior of the Ultra-High Performance Concrete-Filled Socket Connections Between the Bridge Piers and Footings

Experimental and numerical study of precast bridge piers with a new UHPC socket column-footing connection

Experimental and Analytical Studies on Interfacial Shear Behavior of Socket Connections with Shear Keys

Experimental Study on Direct Shear Performance of Concrete-Concrete Interface of Prefabricated Structure Sleeve Grouting Connection

Numerical Analysis on Shear Behavior of Joints under Low Confining and Eccentric Loads

The Influence of Socket Depth on the Seismic Behavior of Precast Hollow Bridge Pier

Shear Strength of Match-Cast-free Dry Joint in Precast Girders

Experimental Studies on Seismic Performance of Socket Connections with Shear Keys and Inner and Outer Filled Reinforced Concrete

Numerical Analysis on the Shear Behavior of Single-Keyed Dry Joints in Precast High-Strength Concrete Segmental Bridges

Experimental Study on Shear Transfer Across Interfaces with Post-Installed Shear Reinforcement

Shear Strength of Steel Fiber-Reinforced Concrete Dry Joints in Precast Segmental Bridges

Behavior of Grouped Stud Shear Connectors Between Precast High-Strength Concrete Slabs and Steel Beams

Experimental Study on Shear Behavior of Precast High-Strength Concrete Segmental Beams with External Tendons and Dry Joints

Structural performance at the joint of precast pile-supported pier structure

Research on cyclic behavior of precast bridge piers with ECC-socket connections

Precast segmental piers: testing, modeling and seismic assessment of an emulative connection based on a grouted central tenon

Effect of a Novel Joint Connection of UHPC Wet Joint and Tapered Sleeve Locking-Type Couplers on the Lateral Cyclic Response of Precast Segmental Railway Bridge Columns