Abstract:Accelerated bridge construction, with innovative connection details and construction technologies, has been extensively investigated and put into practical application for years. Nowadays, there are three commonly used connection methods of accelerated bridge construction technology, namely, lap‐spliced connection, sleeve connection, and socket connection. Due to the convenience of construction and lower requirements of construction accuracy, the socket connection is more suitable for reconstruction and expansion projects of traffic infrastructure, which could minimize the impact on traffic and accelerate construction progress. According to the structural characteristics of the socket connection, there are some design parameters that may significantly affect the seismic resistance of the structure, such as socket embedment length, fabrication of the shear key, and grouting material strength. To fully study the influence of different design parameters on structural performance, an experiment was carried out to investigate the seismic behavior of the precast pier‐footing socket connections with different design parameters. Five 1:2 scale reinforced concrete precast pier‐footing socket connection specimens with different design parameters were designed and tested under cyclically reversed horizontal loads. The development of hysteresis features, failure mode, load‐bearing capacity, stiffness degradation, structural ductility, energy dissipation capacity, and residual drift are analyzed to reveal the influence of the different design parameters on the seismic behavior of the precast pier‐footing socket connection. The seismic behavior of the precast pier‐footing socket connection was significantly influenced by the embedment length especially when the embedment length was less than 1.0bc. When the embedment length was 0.5bc, the failure mode changed from bending damage at the bottom of the precast pier to the anchorage failure of the precast pier‐footing socket connection. When the embedment length was 1.5bc, the fabrication of the shear key had limited improvement on the seismic performance of the specimen, while reducing the ductility of the specimen. When the embedment length was 1.0bc, the grouting material with a strength grade of C60 could be used in the socket connection between the precast pier and footing. The research presented in this paper provides some design suggestions and a technical basis for evaluating the seismic behavior of precast pier‐footing structures with socket connection.

Research on cyclic behavior of precast bridge piers with ECC-socket connections

Experimental Studies on Precast Prestressed Concrete Pile to Cip Concrete Pile-Cap Connections

The Influence of Socket Depth on the Seismic Behavior of Precast Hollow Bridge Pier

Experimental investigation of seismic behavior of precast pier‐footing socket connection with different design parameters

Experimental Studies on Seismic Performance of Socket Connections with Shear Keys and Inner and Outer Filled Reinforced Concrete

Study on time-varying seismic vulnerability and analysis of ECC-RC composite piers using high strength reinforcement bars in offshore environment

Three-dimensional finite element analyses for cyclic responses of precast segmental bridge piers accounting for bond-slip degradation

Experimental and numerical study of precast bridge piers with a new UHPC socket column-footing connection

Investigations on influences of Engineered Cementitious Composites (ECC) on pull-out properties of studs in steel-concrete composite bridge

Effective length coefficient of pier of multi-span continuous rigid-frame bridge based on transfer matrix method with branch

Experimental study on the seismic performance of self-centering bridge piers incorporating ECC and superelastic SMA bars in the plastic hinge regions

Cyclic behavior of joints assembled using prefabricated beams and columns with Engineered Cementitious Composite (ECC)

Experimental Study on Direct-Shear Behaviour of Narrow Joints in Socket Connections for Precast Pier-to-pile Footing Systems

Precast segmental piers: testing, modeling and seismic assessment of an emulative connection based on a grouted central tenon

Experimental and Numerical Investigations of the Impact Resistance of Socket and Pocket Connections for Precast Bridge Columns

Fresh/Mechanical/Durability Properties and Structural Performance of Enginnered Cementitious Composite (ECC)

Flexural performance of novel ECC-RC composite sandwich panels

Investigating the shear behaviors of hollow core beams strengthened with ESS-HCC and shear steel rebars

Numerical Investigations on Seismic Behavior of Segmental Assembly of Concrete Filled Steel Tube Piers with External Replaceable Energy-Dissipating Links

Bearing capacity of embedded channel-shaped steel connections at precast concrete beam end

Effect of a Novel Joint Connection of UHPC Wet Joint and Tapered Sleeve Locking-Type Couplers on the Lateral Cyclic Response of Precast Segmental Railway Bridge Columns