Abstract:Accelerated bridge construction, with innovative connection details and construction technologies, has been extensively investigated and put into practical application for years. Nowadays, there are three commonly used connection methods of accelerated bridge construction technology, namely, lap‐spliced connection, sleeve connection, and socket connection. Due to the convenience of construction and lower requirements of construction accuracy, the socket connection is more suitable for reconstruction and expansion projects of traffic infrastructure, which could minimize the impact on traffic and accelerate construction progress. According to the structural characteristics of the socket connection, there are some design parameters that may significantly affect the seismic resistance of the structure, such as socket embedment length, fabrication of the shear key, and grouting material strength. To fully study the influence of different design parameters on structural performance, an experiment was carried out to investigate the seismic behavior of the precast pier‐footing socket connections with different design parameters. Five 1:2 scale reinforced concrete precast pier‐footing socket connection specimens with different design parameters were designed and tested under cyclically reversed horizontal loads. The development of hysteresis features, failure mode, load‐bearing capacity, stiffness degradation, structural ductility, energy dissipation capacity, and residual drift are analyzed to reveal the influence of the different design parameters on the seismic behavior of the precast pier‐footing socket connection. The seismic behavior of the precast pier‐footing socket connection was significantly influenced by the embedment length especially when the embedment length was less than 1.0bc. When the embedment length was 0.5bc, the failure mode changed from bending damage at the bottom of the precast pier to the anchorage failure of the precast pier‐footing socket connection. When the embedment length was 1.5bc, the fabrication of the shear key had limited improvement on the seismic performance of the specimen, while reducing the ductility of the specimen. When the embedment length was 1.0bc, the grouting material with a strength grade of C60 could be used in the socket connection between the precast pier and footing. The research presented in this paper provides some design suggestions and a technical basis for evaluating the seismic behavior of precast pier‐footing structures with socket connection.

Experimental Studies on Seismic Performance of Socket Connections with Shear Keys and Inner and Outer Filled Reinforced Concrete

EXPERIMENTAL STUDY ON THE SEISMIC BEHAVIOR OF CFST RECTANGULAR COLUMN TO H-SECTION STEEL BEAM CONNECTIONS WITH EXTERNAL STIFFENERS

Seismic Behavior of Exterior Connections with Steel Beams Bolted to Cft Columns

Experimental Studies on Precast Prestressed Concrete Pile to Cip Concrete Pile-Cap Connections

Experimental research on seismic performance of confined concrete filled tubular columns under cyclic loading

Experimental Research on End-plate Bolted Connection with Steel Beam and Reinforced Concrete Column

Experimental investigation of seismic behavior of precast pier‐footing socket connection with different design parameters

The Influence of Socket Depth on the Seismic Behavior of Precast Hollow Bridge Pier

Experimental and Analytical Studies on Interfacial Shear Behavior of Socket Connections with Shear Keys

Mechanical Behaviour of Concrete-Filled CHS Connections Subjected to In-Plane Bending

Mechanical Behaviour and Design of Concrete-Filled K and KK CHS Connections

Shear performance and failure mechanism of socket CFST column-beam connection with UHPC grouting

Experimental and numerical study of precast bridge piers with a new UHPC socket column-footing connection

Experimental Investigation and Design of Concrete-Filled Steel Tubular CHS Connections

Performance Characterization and Design Recommendations of Socket Connections for Precast Columns

Research on cyclic behavior of precast bridge piers with ECC-socket connections

Seismic behaviors of precast assembled bridge columns connected with prestressed threaded steel bar: Experimental test and hysteretic model

Experimental Studies on Seismic Behaviors of Connections with Anchorages for Concrete-Filled Square Steel Tubes

Experimental Study on Direct-Shear Behaviour of Narrow Joints in Socket Connections for Precast Pier-to-pile Footing Systems

Experimental and Numerical Investigations of the Impact Resistance of Socket and Pocket Connections for Precast Bridge Columns

Connections between precast hollow concrete columns and foundations using UHPC and rebar lap splices