Abstract:We present high resolution thermal expansion measurement data obtained with high relative sensitivity of $\Delta$L$/$L = 10$^{-9}$ and accuracy of $\pm$2$\%$ using closed cycle refrigerators employing two different dilatometers. The data quality is in excellent agreement with those obtained using wet liquid helium based systems, demonstrating great technological possibilities for future thermal expansion measurements in view of the depleting resource of liquid helium. The cryogenic environment was achieved using two different cryostats that use pulse tube and Gifford-Mcmahon coolers as the cryocoolers. Both the dilatometers employ a spring movement for achieving the parallel movement of the capacitor plates. $Dilatometer \#1$ was built in-house based on a published design while $dilatometer \#2$ was obtained commercially. Cell calibration for $dilatometer \#1$ was done using copper and minimal deviation of the cell effect from the published values were found. Linear thermal expansion coefficient $\alpha$ obtained using both dilatometers was evaluated using two different techniques, namely, numerical differentiation and derivative of a polynomial fit. The resultant $\alpha$ obtained for metals silver and aluminium showed excellent match with published values obtained on systems using wet cryostats. Finite element method simulations were performed for understanding the spring movement in each dilatometer using which the effect of different forces$/$pressures on the displacement of the spring was studied. Finally, we report thermal expansion measurements done on single crystals of two high temperature superconductors YBa$_2$Cu$_{3-x}$Al$_x$O$_{6+\delta}$ and Bi$_2$Sr$_2$CaCu$_2$O$_{8+x}$ along the c-axis and found very good match with published data obtained using wet liquid helium based cryostats.

Thermal expansion and magnetostriction measurements using a Quantum Design Physical Property Measurement System

A uniaxial stress capacitive dilatometer for high-resolution thermal expansion and magnetostriction under multiextreme conditions

Thermal Expansion and Magnetostriction Measurements at Cryogenic Temperature Using the Strain Gauge Method

Setup of high resolution thermal expansion measurements in closed cycle cryostats using capacitive dilatometers

Three terminal capacitance technique for magnetostriction and thermal expansion measurements

A High Resolution Dilatometer Using Optical Fiber Interferometer

Capacitive detection of magnetostriction, dielectric constant, and magneto-caloric effects in pulsed magnetic fields

A temperature-modulated dilatometer by using a piezobender-based device

New applications for the world's smallest high-precision capacitance dilatometer and its stress-implementing counterpart

Speed of electronic phase propagation in revealed by dilatometry

Optical Sensing of Magnons Via the Magnetoelastic Displacement

AC Heat capacity and magnetocaloric effect measurements for pulsed magnetic fields

Magnetostriction studies up to megagauss fields using fiber Bragg grating technique

Thermal Expansion of Silicon Between 293 K and 873 K Using a Capacitor Dilatometer

100 MHz high-speed strain monitor using fiber Bragg grating and optical filter applied for magnetostriction measurements of cobaltite at magnetic fields beyond 100 T

Quantitative Profilometric Measurement of Magnetostriction in Thin-Films

AC measurement of heat capacity and magnetocaloric effect for pulsed magnetic fields

Magnetostriction measurements at milli-kelvin temperatures using a Fabry–Pérot interferometer

Measurement of the angle dependence of magnetostriction in pulsed magnetic fields using a piezoelectric strain gauge

Nanomechanical probing and strain tuning of the Curie temperature in suspended Cr2Ge2Te6-based heterostructures