Magnetostriction measurements at milli-kelvin temperatures using a Fabry–Pérot interferometer

Finnian J. Blaauw-Smith,Luke S. Trainor,Gavin G. G. King,Nicholas J. Lambert,Masaya Hiraishi,Jevon J. Longdell

DOI: https://doi.org/10.1063/5.0191294

IF: 1.6

2024-04-01

Review of Scientific Instruments

Abstract:This paper demonstrates an optical technique to measure magnetostrictive strain in a cryogenic environment using a Fabry–Pérot resonator spaced by crystal samples. Optical measurement techniques are calibration-free and highly sensitive. This technique was used to measure the magnetostrictive strain of neodymium gallate at a temperature of 49 mK to be λ = 1.3 × 10−5 at 3 T, with a sensitivity of 3.0 × 10−8. We highlight the interesting properties of the crystal’s magnetic ordering. The sensitivity of this technique was limited by the wavemeter used to measure the laser frequency, and significant improvements in the sensitivity should be possible.

instruments & instrumentation,physics, applied

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to measure the magnetostrictive effect of materials in an extremely low - temperature environment. Specifically, the authors have developed an optical technique based on the Fabry - Pérot interferometer to measure the magnetostrictive strain of neodymium gallate at millikelvin temperatures. Traditional measurement methods such as capacitive dilatometers, although highly sensitive at low temperatures, have problems such as a limited measurement range, the need for calibration, and the influence of sample chamber thermalization and stray magnetic fields. In contrast, the optical method does not require calibration and is highly sensitive, and can overcome some of the limitations of the above - mentioned traditional methods.

In the paper, the author demonstrates the feasibility of this technique through experiments and reports that the magnetostrictive strain of neodymium gallate measured at a temperature of 49 mK is \(\lambda = 1.3\times10^{-5}\) (in a 3 - tesla magnetic field), with a sensitivity reaching \(3.0\times10^{-8}\). In addition, the author also discusses the possibility of further improving the measurement sensitivity, for example, by improving the laser frequency measurement technique.