Abstract:This article presents an 18 similar to 30 GHz vector-sum phase shifter for wireless application in the millimeter-wave regime. It is composed of an I/Q signal generator, two variable-gain amplifiers (VGA), and a digital-to-analog converter with a quadrant selector. To attain wideband quadrature signal, a two-stage hybrid based on transformers is proposed to realize the I/Q signal generator. The first- and second-stage hybrids are designed with different resonating frequencies. As a result, the amplitude and phase errors of the I/Q signal generator are significantly decreased in a wide frequency band. In addition, theoretical analysis based on a simplified equivalent-circuit model is performed to guide the circuit implementation, and its correctness is demonstrated by electromagnetic simulation. To mitigate the impact of the VGAs' parasitics on the phase performance, a capacitive-neutralization technique is applied to cancel parasitics of transistors in the VGAs. A prototype circuit is designed using a 130-nm SiGe BiCMOS process. The measured results show that the circuit achieves a root-mean-square (RMS) amplitude error of less than 1.4 dB and an RMS phase error of 1.4 degrees similar to 3.4 degrees across 18 similar to 32 GHz. The tested peak gains of all the phase states are -1 similar to 4.5 dB with an input balun (approximate to 1.9 dB loss) and an output balun (approximate to 2 dB loss) at 22 GHz. Also, the input 1-dB compression point and noise figure are tested, which are >=-1 dBm and <= 15.5 dB in the targeting frequency band.

A 220–320-GHz Vector-Sum Phase Shifter Using Single Gilbert-Cell Structure With Lossy Output Matching

An 18~30 GHz Vector-Sum Phase Shifter with Two-Stage Transformer-Based Hybrid in 130-Nm SiGe BiCMOS

An 18 similar to 30 GHz Vector-Sum Phase Shifter With Two-Stage Transformer-Based Hybrid in 130-nm SiGe BiCMOS

An Ultra Broadband Passive Vector Modulator Phase Shifter

An E-band Subradix Active Phase Shifter with < 0.69° RMS Phase Error and 16-Db Attenuation in 28-Nm CMOS

A 8-12 GHz Vector-Sum Phase Shifter Using a Marchand Balun and Gilbert-Cell Structure

29-/35 GHz Dual-band High-Gain Phase Shifter with Hybrid -Networks

A Continuous K-Band Phase Shifter Based on Injection-Locked Dual Voltage-Controlled Oscillators

On-chip vector modulation phase shifter

A Wideband 6-Bit Phase Shifter with Low RMS Error in 65nm CMOS Technology

A Ka-band 8-Element 4-Beam Transmitter Front End with Hybrid VGA and Symmetrical Transformer-based Doherty PA

A Calibration Scheme for 24–28-Ghz Variable-Gain Phase Shifter in 65-Nm CMOS

A 6–18ghz Vector-Sum 6-Bit Active Phase Shifter

A 24.25-26.65 Ghz 6-Bit Vector-Sum Phase Shifter in 65nm Cmos

A 0.3–4.2-Ghz Frequency-Agile Phase Shifter Based on N-Path Passive Mixers Achieving Low Rms Phase/Amplitude Error

A Wideband Vector-Modulated Variable Gain Phase Shifter for 5G NR FR2 in 40-nm CMOS

A Variable Gain Phase Shifter Based on Insertion-Loss-Tunable Baluns

A 28ghz 6-Bit Two-stage Vector-sum Phase Shifter with Low RMS Error for 5G Mobile Communication

A 22.5–33.5-Ghz Hybrid Phase Shifter with Low Phase and Amplitude Error for 5G and Satellite Communication

Design and Analysis of a 26–32-Ghz 6-Bit Passive Vector Modulation Phase Shifter for CMOS Bidirectional Transceiver

A 26-32Ghz 6-Bit Bidirectional Passive Phase Shifter with 14dbm IP1dB and 2.6° RMS Phase Error for Phased Array System in 40nm CMOS