Abstract:This article presents an 18 similar to 30 GHz vector-sum phase shifter for wireless application in the millimeter-wave regime. It is composed of an I/Q signal generator, two variable-gain amplifiers (VGA), and a digital-to-analog converter with a quadrant selector. To attain wideband quadrature signal, a two-stage hybrid based on transformers is proposed to realize the I/Q signal generator. The first- and second-stage hybrids are designed with different resonating frequencies. As a result, the amplitude and phase errors of the I/Q signal generator are significantly decreased in a wide frequency band. In addition, theoretical analysis based on a simplified equivalent-circuit model is performed to guide the circuit implementation, and its correctness is demonstrated by electromagnetic simulation. To mitigate the impact of the VGAs' parasitics on the phase performance, a capacitive-neutralization technique is applied to cancel parasitics of transistors in the VGAs. A prototype circuit is designed using a 130-nm SiGe BiCMOS process. The measured results show that the circuit achieves a root-mean-square (RMS) amplitude error of less than 1.4 dB and an RMS phase error of 1.4 degrees similar to 3.4 degrees across 18 similar to 32 GHz. The tested peak gains of all the phase states are -1 similar to 4.5 dB with an input balun (approximate to 1.9 dB loss) and an output balun (approximate to 2 dB loss) at 22 GHz. Also, the input 1-dB compression point and noise figure are tested, which are >=-1 dBm and <= 15.5 dB in the targeting frequency band.

On-chip vector modulation phase shifter

An Ultra Broadband Passive Vector Modulator Phase Shifter

Hybrid broadband high-precision phase shifter integrated circuit

An 18~30 GHz Vector-Sum Phase Shifter with Two-Stage Transformer-Based Hybrid in 130-Nm SiGe BiCMOS

An 18 similar to 30 GHz Vector-Sum Phase Shifter With Two-Stage Transformer-Based Hybrid in 130-nm SiGe BiCMOS

A Broad-Band Analog Phase Shifter Design on I-Q Vector Modulator

29-/35 GHz Dual-band High-Gain Phase Shifter with Hybrid -Networks

An E-band Subradix Active Phase Shifter with < 0.69° RMS Phase Error and 16-Db Attenuation in 28-Nm CMOS

1–2 GHz 2 Mw Injection-Locked Ring Oscillator Based Phase Shifter in 0.18 Μm CMOS Technology

A Continuous K-Band Phase Shifter Based on Injection-Locked Dual Voltage-Controlled Oscillators

A K-Band Low-Power Phase Shifter Based on Injection Locked Oscillator in 0.13 Μm CMOS Technology

Optimal Design of a Low-Power, Phase-Switching Modulator for Implantable Medical Applications.

An 18-50-GHz - Modulated Quasi-Continuous Digital Vector-Modulation Phase Shifter With Variable Gain Control

A 28ghz Injection-Locked Voltage-Controlled Oscillator Pair with Tunable Phase Outputs in 130nm CMOS.

A 24.25-26.65 Ghz 6-Bit Vector-Sum Phase Shifter in 65nm Cmos

A 65nm CMOS 6–18 GHz Full 360° 6-Bit Phase Shifter

Design and Analysis of a 26–32-Ghz 6-Bit Passive Vector Modulation Phase Shifter for CMOS Bidirectional Transceiver

A 26-32Ghz 6-Bit Bidirectional Passive Phase Shifter with 14dbm IP1dB and 2.6° RMS Phase Error for Phased Array System in 40nm CMOS

A 8-12 GHz Vector-Sum Phase Shifter Using a Marchand Balun and Gilbert-Cell Structure

A 6–18ghz Vector-Sum 6-Bit Active Phase Shifter

Novel Passive Vector-Sum Reconfigurable Filtering Phase Shifter With Continuous Phase-Control and Tunable Center Frequency