Abstract:The long-term anti-corrosion performance of ordinary coatings is unsatisfactory due to their poor barrier properties. Herein, we developed a strategy to construct a triple functional filler by first modifying basalt scales (Bt) with polydopamine (PDA) to introduce active sites, followed by in situ growth of molybdate-loaded layered double hydroxide (LM) on the surface of PDA-modified basalt. This novel strategy not only avoided stacking between LDHs, but also improved the interfacial compatibility between fillers and epoxy resin, which endowed the anti-corrosion system with intelligent self-healing function and barrier anti-corrosion characteristic. Tafel curves obtained in solution phase proved that compared with carbon steel immersed in pure 3.5 wt% NaCl solution, the introduction of @LM causes the I corr to decrease from 1.18 × 10 -5 A/cm 2 to 2.05 × 10 -6 A/cm 2 and the corrosion inhibition efficiency reaches 82.63%. Combined with the significant enhancement of the low-frequency impedance of the scratched @LM/EP coating during immersion in 3.5 wt% NaCl solution, the effective corrosion inhibition of the designed filler was demonstrated. Moreover, the low-frequency impedance of the @LM/EP coating is about 660 times higher than that of the pure epoxy (EP) coating after immersion in 3.5 wt% NaCl solution for 120 days and is still as high as 4.96 × 10 10 ohm·cm 2 after 200 days of immersion. The excellent corrosion resistance can be attributed to the synergistic effect of barrier property, chloride ion trapping effect and corrosion inhibition of the obtained filler. Thence, it is believed that this research will provide insights in developing new long-term anti-corrosion coatings and break the application limitations of polymer-based coatings to some extent.

Improvement in the anti-corrosion property of marine concrete using layered double hydroxides and polyvinylpyrrolidone

A Comparison Study of the Performance of Three Electro-Migrating Corrosion Inhibitors in Improving the Concrete Durability and Rehabilitating Decayed Reinforced Concrete

Effect of modified supplementary cementitious material on performance of mortar and concrete in marine environment

CaFe-Based Layered Double Oxides With Superior Iron Alloy Corrosion Inhibition Behaviors in Aggressive Seawater Environment

Optimal Design and Performance of Concrete with Function Component in Marine Environment

Exploration into Anticorrosive Property of Antirust Compound-Admixture

Study on the corrosion resistance of composite modified anti-corrosion mortar under the action of bio-organic water

Use of ZnAl-Layered Double Hydroxide (LDH) to Extend the Service Life of Reinforced Concrete

Smart Inhibition Action of Amino Acid-Modified Layered Double Hydroxide and Its Application on Carbon Steel

Improved chloride binding capacity and corrosion protection of cement-based materials by incorporating alumina nano particles

A Waterborne Epoxy Composite Coating with Smart Corrosion Resistance Based on 2-Phenylbenzimidazole-5-sulfonic Acid/Layered Double Hydroxide Composite

Anticorrosion Properties of Epoxy Composite Coating Reinforced by Molybdate-Intercalated Functionalized Layered Double Hydroxide

Fabrication of superhydrophobic layered double hydroxide composites to enhance the corrosion-resistant performances of epoxy coatings on Mg alloy

A smart anti-corrosion coating based on triple functional fillers

A Comparative Study of Chloride Adsorption Ability and Corrosion Protection Effect in Epoxy Coatings of Various Layered Double Hydroxides

Study on the Corrosion Resistance of Hydrophobic Cement Mortar

Active anti-corrosion of epoxy coating by nitrite ions intercalated MgAl LDH

Study on Corrosion Resistance of Hydrophobic Early Strength Mortar Containing Calcium Formate

Corrosion Inhibition Effect of Mg-Al-pAB-LDH Coating for Steel in the Marine Environment

Anticorrosion behavior of polyvinyl butyral (PVB) / polymethylhydrosiloxane (PMHS) / chitosan (Ch) environment-friendly assembled coatings