Abstract:The effectiveness of the conventional friction pendulum isolator (FPI) is limited in complex geographical environments and unpredictable earthquake events due to its complex frictional properties and the requirement for a unified setup target. With a view to addressing the aforementioned issues, in conjunction with an adaptive variable friction pendulum isolator (AVFPI), a simple and practical mechanical model is proposed. After applying the mechanical model with a friction-dependent influence model, an improved response spectrum analysis procedure (IRS) is proposed for variable friction pendulum isolation systems. Notably, the proposed procedure allows for the consideration of the effects of variations in velocity, temperature, and pressure on the friction characteristics without the necessity for nonlinear response history analysis (NRHA). The procedure commences with obtaining a numerical model of friction dependency through friction material examinations, then proceeds to verifying the reliability of both the friction dependency and mechanical model through prototype tests of AVFPIs. The following study presents a proposed correction method that depends on random vibration theory to establish a functional relationship between the pseudo-velocity spectrum and the velocity spectrum. Additionally, an association is established between the peak velocity and the generation of frictional heat. Finally, the procedure is evaluated based on the results of an NRHA that takes friction dependence into account through a numerically variable friction pendulum isolation system. The results of the study indicate that the IRS provides a more accurate and secure assessment of the isolator displacement at various temperatures than the response spectrum method, which does not account for the influence of frictional dependency. The failure to consider the influence of friction dependency in high-temperature environments produces an underestimation of isolator slip displacement and a subsequent increase in failure rates. The Polytetrafluoroethylene (PTFE) friction materials that are currently in widespread use exhibit a strong correlation with friction dependence and, as a consequence, cause relatively large displacements at temperatures that are both low and high. The results of this study present an opportunity to expand how response spectrum analysis techniques can be applied to friction pendulum isolation systems.

Seismic Control of Benchmark Cable-Stayed Bridges Using Variable Friction Pendulum Isolator

Seismic Performance of Polynomial Friction Pendulum Isolator (PFPI) on Benchmark Cable-Stayed Bridge

Seismic Response of Isolated Railway Bridge Subjected to Near-fault Ground Motion

Experimental study on a cable-stayed bridge isolated with the combination of elastoplastic cables and fluid viscous dampers in the transverse direction

Cyclic behavior of an adaptive seismic isolation system combining a double friction pendulum bearing and shape memory alloy cables

Seismic response characteristics of bridges using double concave friction pendulum bearings with tri-linear behavior

Seismic response of structures with friction pendulum inerter system (FPIS) under near-fault earthquakes

SEISMIC RESPONSE CONTROL OF A CABLE-STAYED BRIDGE BY VARIABLE DAMPERS

Shaking table tests and numerical studies on the seismic behaviors of FPB in railway continuous beam bridges

Seismic Isolation Design for Long-span Prestressed Concrete Continuous Girder Bridge

Shaking table tests of base-isolated reinforced concrete frame by double friction pendulum bearings

Improved response spectrum analysis procedure for an adaptive variable friction pendulum isolated structure considering frictional dependency

Seismic performance improvement of continuous rigid-frame bridges with hybrid control system under near-fault ground motions

Seismic isolation effect of a new type of friction pendulum bearing in high-speed railway girder bridge

Development of a tunable friction pendulum system for semi-active control of building structures under earthquake ground motions

Seismic performance assessment of RC bridge piers with variable hysteresis performance dampers

Applications of Some Semiactive Control Systems to Benchmark Cable-Stayed Bridge

Seismic Behavioural study of A-Shaped Pylon Cable-stayed Bridge through Seismic Fragility Assessment

Advances and challenges in friction pendulum bearings for seismic isolation systems

Parametric Study of SMA-based Friction Pendulum System for Response Control of Bridges under Near-Fault Ground Motions

Study on Seismic Isolation of Long Span Double Deck Steel Truss Continuous Girder Bridge