Abstract:In addressing the challenge of high viscosity in Xinjiang Tahe heavy oil, crucial for optimizing extraction processes, this study focuses on identifying and analyzing the microstructure of key components influencing oil viscosity. The aim is to uncover the underlying reasons for its high viscosity and guide research towards effective viscosity reduction techniques. Electrospray ionization (ESI) combined with fourier transform ion cyclotron resonance mass spectrometry (FT-ICR/MS) characterizes the molecular-level constituents contributing to oil viscosity. The investigation covers the composition and distribution of oxygen-containing, nitrogen-containing, and organometallic compounds, developing a molecular structure model for these critical viscosity-inducing components. Findings reveal Xinjiang Tahe extra heavy oil as a solid mass at room temperature, with significant viscosity reduction observed post-deasphalting, highlighting asphaltenes' pivotal role in viscosity. Analysis indicates a higher content of metal elements (such as V and Ni) in asphaltenes compared to the crude oil itself, with an abundance of porphyrin structures in asphaltenes markedly influencing oil viscosity. Cyclic, aromatic, and unsaturated compound structures are predominantly found in the asphaltenes of heavy oil. Through combined ESI (±) FT-ICR/MS analysis, the crude oil is determined to mainly comprise acidic compounds, non-basic nitrogen compounds, and basic nitrogen compounds, offering significant insight into heavy oil's complex chemical composition. Specifically, non-basic nitrogen compounds in Tahe crude oil, including alkylcarbazoles, alkylbenzocarbazoles, and alkylpolybenzocarbazoles, are identified as key components, with molecular carbon numbers ranging from C12 to C56 and a predominance near C27. Additionally, asphaltenes in Tahe heavy oil exhibit a higher double bond equivalence (DBE) than the crude oil, indicating a greater degree of condensation with an increased number of double bonds and heterocyclic structures. The significant difference in DBE values between asphaltenes and crude oil underscores their impact on viscosity. A detailed molecular structure model of the asphaltenes in Tahe extra heavy oil has been constructed based on FT-ICR/MS analysis, providing a foundational understanding for developing viscosity reduction strategies.

Refining Tahe Heavy Crude Oil to Increase Light Product Yield

Optimisation of Enzymatic Pretreatment of Soybean Oil Deodoriser Distillate for Concentration of Tocopherols

Viscosity Reduction Process of Heavy Oil by Catalytic Co-Pyrolysis with Sawdust

Novel Terpolymers As Viscosity Reducing Agent for Tahe Super Heavy Oil

Hysis Simulation Optimization of Distillation Desulfurization for Mixed Light Hydrocarbons in Tahe Oil Field

Heavy Petroleum Supercritical Fluid Deasphalting Process Simulation Based On the Saturate, Aromatic, Resin, and Asphaltene Composition

Solvent processing for improved separation of hydrothermal liquefaction products

Analysis of the microstructure of high viscosity components in Tahe ultra heavy oil based on the combination of ESI (±) FT-ICR/MS

Synthesis of Surfactant Used in Heavy Oil Catalytic Cracking

Heavy Oil to Chemicals: Multi-Stage Downer Catalytic Pyrolysis

Catalytic asphaltene upgrading under methane environment: Solvent effect and its interaction with oil components

Enhancing low-temperature thermal remediation of petroleum sludge by solvent deasphalting

Enhancing light olefins and aromatics production from naphthenic-based vacuum gas oil: Process integration, techno-economic analysis and life cycle environmental assessment

DEVELOPMENT AND COMMERCIAL APPLICATION OF KEY TECHNOLOGY FOR EFFICIENT CONVERSION OF HEAVY OIL

Selective Extraction of Aromatics from Residual Oil with Subcritical Water

Characterization of Asphaltene Deposition Behavior in Diluted Heavy Oil under High-Pressure Conditions

Efficient processing of crude oil using direct cracking at high temperatures over modified FCC catalysts

Bitumen Recovery from Crude Bitumen Samples from Halfaya Oilfield by Single and Composite Solvents-Process, Parameters, and Mechanism

Composition of sulfur species in deasphalted oils and their molecular-level transformation during the hydrotreating process

Crude oil hierarchical catalytic cracking for maximizing chemicals production: Pilot-scale test, process optimization strategy, techno-economic-society-environment assessment

Upgrading of high-boiling fraction of bio-oil in supercritical methanol