Bubble generation and mechanism in polydimethylsiloxane based polymerase chain reaction chip

Jingdong Chen,Di Chen,Yao Xie,Xiang Chen,Kan Wang,Daxiang Cui,Hangxiang Du,Zhigang Wang

DOI: https://doi.org/10.1063/1.4907678

IF: 4

2015-02-02

Applied Physics Letters

Abstract:In order to explain the mechanism of bubble generation in polydimethylsiloxane (PDMS), we investigated the crucial factors: the surface wettability and permeability of PDMS. Two microfluidic chips were designed and fabricated: a PDMS/glass chip and a glass/PDMS/glass sandwich chip (about 1 μm in thickness of PDMS). Then, two sets of experiments were carried out: a comparison between the PDMS/glass chips untreated and treated with O2 plasma, and another comparison between a PDMS/glass chip and a glass/PDMS/glass sandwich chip. The bubble in the PDMS/glass chip was avoided by treating with O2 plasma. After the treatment, the residual gas between the PDMS surface and water was eliminated in that the PDMS surface became hydrophilic. In addition, the gas molecules required higher energy to enter the chambers due to the reduced contact angle of PDMS and water. The glass/PDMS/glass sandwich chip was treated with the vacuum processing to eliminate the residual gas. And the gas outside of the chip did not enter the chambers through the thin layer of PDMS easily. This further verified that the surface wettability and the permeability of PDMS can result in the bubble generation.

physics, applied