Abstract:Bubble formation inside a microscale channel is a significant problem in general microfluidic experiments. The problem becomes especially crucial when performing a polymerase chain reaction (PCR) on a chip which is subject to repetitive temperature changes. In this paper, we propose a bubble-free sample injection scheme applicable for continuous-flow PCR inside a glass/PDMS hybrid microfluidic chip, and attempt to provide a theoretical basis concerning bubble formation and elimination. Highly viscous paraffin oil plugs are employed in both the anterior and posterior ends of a sample plug, completely encapsulating the sample and eliminating possible nucleation sites for bubbles. In this way, internal channel pressure is increased, and vaporization of the sample is prevented, suppressing bubble formation. Use of an oil plug in the posterior end of the sample plug aids in maintaining a stable flow of a sample at a constant rate inside a heated microchannel throughout the entire reaction, as compared to using an air plug. By adopting the proposed sample injection scheme, we demonstrate various practical applications. On-chip continuous-flow PCR is performed employing genomic DNA extracted from a clinical single hair root sample, and its D1S80 locus is successfully amplified. Also, chip reusability is assessed using a plasmid vector. A single chip is used up to 10 times repeatedly without being destroyed, maintaining almost equal intensities of the resulting amplicons after each run, ensuring the reliability and reproducibility of the proposed sample injection scheme. In addition, the use of a commercially-available and highly cost-effective hot plate as a potential candidate for the heating source is investigated.

Complete Prevention of Bubbles in a PDMS-Based Digital PCR Chip with a Multifunction Cavity

Overcoming bubble formation in polydimethylsiloxane-made PCR chips: mechanism and elimination with a high-pressure liquid seal

Propidium Monoazide Pretreatment on a 3D-Printed Microfluidic Device for Efficient PCR Determination of ‘liveversusdead’ Microbial Cells

A PDMS-based Digital PCR Chip with Vacuum Aspiration and Water-Filling Cavity Integrated for Sample Loading and Evaporation Reduction

Bubble generation and mechanism in polydimethylsiloxane based polymerase chain reaction chip

A Simple and Practicable PCR-Microchip with Bubble-Free Stationary Chamber

A Self-Priming Microfluidic Chip with Cushion Chambers for Easy Digital PCR

A New Method for Polydimethylsiloxane (PDMS) Microfluidic Chips to Maintain Vacuum-Driven Power Using Parylene C

Digital PCR chip based on PDMS spherical cavity array

A self-digitization chip integrated with hydration layer for low-cost and robust digital PCR

A Microfluidic Chip Based on Surfactant-Doped Polydimethylsiloxane (PDMS) in a Sandwich Configuration for Low-Cost and Robust Digital PCR

Bubble-free on-chip continuous-flow polymerase chain reaction: concept and application

A Multi-Volume Microfluidic Device with No Reagent Loss for Low-Cost Digital PCR Application

DNA Amplification on a PDMS–glass Hybrid Microchip

Digital PCR on an integrated self-priming compartmentalization chip

A nanoliter self-priming compartmentalization chip for point-of-care digital PCR analysis

A Double-Deck Self-Digitization Microfluidic Chip for Digital PCR

Bubble-free rapid microfluidic PCR

Design and Experiment of a PDMS-based PCR Chip with Reusable Heater of Optimized Electrode

A Silicon-Based PDMS-PEG Copolymer Microfluidic Chip for Real-Time Polymerase Chain Reaction Diagnosis

Microfluidic handling of PCR solution and DNA amplification on a reaction chamber array biochip