Abstract:Due to the increasing cost of Au, the semiconductor industry has gone through a dramatic shift away from Au wire bonding to Cu wire bonding. Pd-coated Cu (PdCu) wire has become the favored wire choice over bare Cu wire for fine pitch applications. The advantages of PdCu wire include better HAST reliability results and a more stable stitch bond process window. This paper will examine the critical aspect of bringing Cu and PdCu wire technology from chip design to wire bonding process development to qualification, reliability test and final production. Chip design needs to take into consideration the requirement of Cu wire bonding. Compared to Au wire bonding, Cu wire bonding has many more challenges including pad material push out (pad splash), Al layer peel off (pad peel) and crack in the barrier and dielectric layer (pad crack). This paper considers the impact of various pad structures & metallization to PdCu wire assembly quality and reliability. Because of the unique challenges facing Cu wire bonding processes, wire bonding process development becomes one of the bottlenecks in the assembly process. To shorten the development cycle and ease the requirement for extensive Design Of Experiments (DOEs), a new model based approach was developed and implemented on the latest Cu wire bonder. With this approach, the bonding parameters are calculated based on numerical models. It reduces the need for parameter optimization. This paper will also discuss how modifications and newly developed metrology tools are used in the optimization of PdCu wire. Because of the narrow process window in Cu and PdCu wire bonding, achieving reliable production and high yields requires the process to have a sustainable process window and be portable and transferable to multiple machines and be robust across material variations commonly encountered in a production environment. This paper examines the methods used in quantifying process windows and portability of the wire bonding equipment to ensure high reliability for the end product. Development and optimization of PdCu wire bonding requires a fundamental understanding of interfacial reaction in bonds during both bonding and reliability tests, as proper formation of intermetallic compounds is beneficial to bonding strength. While the knowledge of intermetallic growth in bare copper wire bonds on aluminum has become well established in the past five years, there is little literature in terms of the morphology and growth of intermetallic phase between PdCu wire and Al pad. This paper ascertains the intermetallic growth and phase transformation, retention of aluminum oxide, and behavior of palladium in PdCu wire bonds using high resolution transmission electron microscopy (HRTEM) of dual beam focused ion beam (FIB) thinned specimens.

Influence of Al/CucorAl wire bonding on reliability of SiC devices

Al-clad Cu Bond Wires for Power Electronics Packaging: Microstructure Evolution, Mechanical Performance, and Molecular Dynamics Simulation of Diffusion Behaviors

Improving Power Cycle Lifetime of SiC Power Modules with Double-Bonded Wire: Experimental and Simulation Analysis

Effect of Silicone Gel on the Reliability of Heavy Aluminum Wire Bond for Power Module During Thermal Cycling Test

Loop Height Effects on Bond Wire Reliability under Power Cycling for SiC Power Module

Analysis of Novel Packaging Techniques for High Power Electronics in SiC

Non-continuous IMC in copper wirebonding: Key factor affecting the reliability

Study of Current Density Influence on Bond Wire Degradation Rate in SiC MOSFET Modules

Mechanical Issues of Cu-to-Cu Wire Bonding

A Way to Reduce Leakage Current and Improve Reliability of Wire-Bonds for 300-A Multichip SiC Hybrid Modules

High-temperature Resistant Interconnections Formed by Ni Nanoparticles/Al Micro-particles Composite Paste for SiC Power Device Application

Ultrasonic Thick Wire Bonding Process Simulation and Validation for Silicon Carbide Power Devices

Simulation of performance and reliability of nanocopper paste in power device packaging

Interface-Mechanical and Thermal Characteristics of Ag Sinter Joining on Bare DBA Substrate During Aging, Thermal Shock and 1200 W/cm 2 Power Cycling Tests

Life Prediction of High-Cycle Fatigue in Aluminum Bonding Wires Under Power Cycling Test

Pd-coated Cu wire bonding technology: Chip design, process optimization, production qualification and reliability test for high reliability semiconductor devices

Degradation in Electrothermal Characteristics and Failure Mechanism of SiC JBS with Different Die Attach Materials under 300°C Power Cycle Stress

Interfacial Bonding of Al-Si/C Composites and Improvement of the Thermal Shock Resistance

Investigation of the mechanical characteristics of the Cu/low-k BEOL under wire bonding process loading

Effect of Ag Sintered Bondline Thickness on High-Temperature Reliability of SiC Power Devices

Thermal management applied laminar composites with SiC nanowires enhanced interface bonding strength and thermal conductivity