Abstract:The adsorption separation of volatile organic compounds affords an efficient potential solution to address VOC emission. In this work, we reported alkaline sites-modified biomass-carbon adsorbents through in situ implanting MgO for reinforcing the adsorption abatement of polar VOCs. We revealed that the dispersed MgO alkaline sites in situ formed over the activated carbon during the KOH activation process by placing the magnesium acetate and KOH into grapefruit peel-based biochar together, which avoids the repeated postmodification. By tuning the mass proportion of Mg precursor and KOH activator, the optimized loading of magnesium oxide in AC was explored and compared with the MgO post-modified AC using a two-step procedure. The physicochemical properties of MgO-modified AC were characterized by various techniques. Impressively, MgO occupied a higher surface formation ratio (82.6%) in whole Mg species of the in-situ synthesized 10MgO/C compared to that (51.4%) in postimpregnated 10MgO/C-P. The adsorption properties of polar acetic acid and nonpolar benzene over the above comparative adsorbents were systematically studied by the gas-static adsorption method. The results revealed that the optimal sample of 10MgO/C afforded excellent structural properties (SBET = 2646 m2 g−1, Vtotal = 1.59 cm3 g−1) and a large adsorption capacity of polar acetic acid reaching 16.64 mmol g−1 at 30 °C. More importantly, compared to unmodified and nitrogen-doped AC, 10MgO/C showed improved acetic acid adsorption capacity, reversible desorption behavior, and lower adsorption heat. The calculation of Ideal Adsorption Solution Theory (IAST) for selective adsorption separation of the CH3COOH/C6H6 binary mixture(50/50) over 10MgO/C showed the highest selectivity (3.42). This work offers new insight into the in-situ modification of AC and polar VOCs selective adsorption separation.

Valorization of a natural residue (sawdust) as adsorbent to remove the acetic acid in aqueous solutions

Study on Kinetics of Methyl Esterification of Alkali Weight-Reduction Wastewater Residue

Preparation and characterization of novel microstructure cellulosic sawdust material: application as potential adsorbent for wastewater treatment

Synthesis and Characterization of Activated Carbon from Agrowastes for the Removal of Acetic Acid from an Aqueous Solution

Adsorption of Crystal Violet onto an Agricultural Waste Residue: Kinetics, Isotherm, Thermodynamics, and Mechanism of Adsorption

Efficient removal of acetic acid by a regenerable resin-based spherical activated carbon.

Combined Methane Energy Recovery and Toxic Dye Removal by Porous Carbon Derived from Anaerobically Modified Digestate

SOFT MODIFICATION AND FUNCTIONALIZATION OF LIGNOCELLULOSIC BIOMASS USED AS A LOW-COST EFFICIENT BIOSORBENT TO REMOVE BASIC FUCHSINE FROM AQUEOUS SOLUTION

Elimination of crystal violet from aqueous solution by adsorption on naturel polysaccharide: Kinetic, isotherm, thermodynamic studies and mechanism analysis

Efficient adsorption of crystal violet dye using functionalized Argan shell: Experiments and statistical optimization modeling

ACETIC ACID REMOVAL FROM DILUTE AQUEOUS SOLUTIONS USING ZEOLITE 13X

Potential recycle of industrial waste towards economic adsorbent preparation for effective removal of toxic elements

Efficient Decontamination of Cationic Dyes from Synthetic Textile Wastewater Using Poly(acrylic acid) Composite Containing Amino Functionalized Biochar: A Mechanism Kinetic and Isotherm Study

Statistical physics modeling study of an environmentally friendly and efficient adsorbent derived from the brown macroalgae Bifurcaria bifurcata for the removal of Bisphenol A

Removal of textile dye Bemacid Red from water using Casuarina equisetifolia needles: kinetic and thermodynamic modeling

Abatement of Textile Dyes Using Surfactant Modified Adsorbent from Agricultural Waste Sawdust

Reduction of 2,4-dichlorophenoxy acetic acid herbicide toxicity from aqueous media by adsorption: Experimental and theoretical study using DFT method

Waste Biomass Utilization for the Production of Adsorbent and Value-Added Products for Investigation of the Resultant Adsorption and Methanol Electro-Oxidation

In-depth study of adsorption mechanisms and interactions in the removal of pharmaceutical contaminants via activated carbon: a physicochemical analysis

The alkaline sites integrated into biomass-carbon reinforce selective adsorption of acetic acid: In situ implanting MgO during activation operation

Experimental and Theoretical Investigation of Olive Mill Solid Waste Biochar for Vanillic Acid Adsorption Using DFT/B3LYP Analysis