Abstract:Water scarcity and contamination have emerged as critical global challenges, requiring the development of effective and sustainable solutions for the treatment of contaminated water. Recently, functionalized polymer biomaterials have garnered significant interest because of their potential for a wide range of water treatment applications. Accordingly, this paper highlights the design of a new adsorbent material based on a cellulosic nonwoven textile grafted with two extracted biopolymers. The layer-by-layer grafting technique was used for the polyelectrolyte multi-layer (PEM) biosorbent production. Firstly, we extracted a Suaeda fruticosa polysaccharide (SFP) and confirmed its pectin-like polysaccharide structure via SEC, NMR spectroscopy, and chemical composition analyses. Afterward, the grafting was designed via an alternating multi-deposition of layers of SFP polymer and carrageenan crosslinked with 1,2,3,4-butanetetracarboxylic acid (BTCA). FT-IR and SEM were used to characterize the chemical and morphological characteristics of the designed material. Chemical grafting via polyesterification reactions of the PEM biosorbent was confirmed through FT-IR analysis. SEM revealed the total filling of material microspaces with layers of grafted biopolymers and a rougher surface morphology. The assessment of the swelling behavior revealed a significant increase in the hydrophilicity of the produced adsorbent system, a required property for efficient sorption potential. The evaluation of the adsorption capabilities using the methylene blue (MB) as cationic dye was conducted in various experimental settings, changing factors such as the pH, time, temperature, and initial concentration of dye. For the untreated and grafted materials, the greatest adsorbed amounts of MB were 130.6 mg/g and 802.6 mg/g, respectively (pH = 4, T = 22 C, duration = 120 min, and dye concentration = 600 mg/L). The high adsorption performance, compared to other reported materials, was due to the presence of a large number of hydroxyl, sulfonate, and carboxylic functional groups in the biosorbent polymeric system. The adsorption process fitted well with the pseudo-first-order kinetic model and Langmuir/Temkin adsorption isotherms. This newly developed multi-layered biosorbent shows promise as an excellent adsorption resultant and cheap-cost/easy preparation alternative for treating industrial wastewater.

Preparation and characterization of novel microstructure cellulosic sawdust material: application as potential adsorbent for wastewater treatment

Preparation and Adsorption Behavior of a Cellulose‐based, Mixed‐mode Adsorbent with a Benzylamine Ligand for Expanded Bed Applications

Elaboration of an innovative plant biomaterial for its valorization in the treatment of wastewater

A New Multistep Chemical Treatment Method for High Performance Natural Fibers Extraction

Application of Anionic Hydrogels from Date Palm Waste for Dye Adsorption in Wastewater Treatment

High-Lignin-Containing Cellulose Nanofibrils from Date Palm Waste Produced by Hydrothermal Treatment in the Presence of Maleic Acid

Preparation of superabsorbent composite(s) based on dialdehyde cellulose extracted from banana fiber waste

Extraction and Characterization of Nanocellulose from Waste of Date Palm “Phoenix Dactylifera” as Reinforcement of Polymer Composites

Enhanced production of ionized nano-fibrillated cellulose from sugar palm fiber via wet disk milling disintegration

SOFT MODIFICATION AND FUNCTIONALIZATION OF LIGNOCELLULOSIC BIOMASS USED AS A LOW-COST EFFICIENT BIOSORBENT TO REMOVE BASIC FUCHSINE FROM AQUEOUS SOLUTION

Development of Luminescent and Photosensitive Cellulose Microfibers From Palm Sprout Fibers: Antibacterial Efficacy and Dye Adsorption Potential

Valorization of a natural residue (sawdust) as adsorbent to remove the acetic acid in aqueous solutions

Highly Efficient Biosorption of Cationic Dyes via Biopolymeric Adsorbent-Material-Based Pectin Extract Polysaccharide and Carrageenan Grafted to Cellulosic Nonwoven Textile

Mesoporous Carbon from Optimized Date Stone Hydrochar by Catalytic Hydrothermal Carbonization Using Response Surface Methodology: Application to Dyes Adsorption

Effect of Leaf Powdering Technique on the Characteristics of Date Palm-Derived Cellulose

Preparation of New Carbonaceous Adsorbents Based on Agricultural Waste and Its Application to the Elimination of Crystal Violet Dye from Water Media

Fabrication, Modification, and Characterization of Lignin-Based Electrospun Fibers Derived from Distinctive Biomass Sources

Date Palm Biochar and Date Palm Activated Carbon as Green Adsorbent—Synthesis and Application

Isolation, Modification, and Characterization of Local Indonesia's Sugarcane Bagasse Cellulose for Dye‐Adsorbent Application

Effect of teak wood lignocellulose pretreatment on the performance of cellulose-graft-(net-poly(acrylamide-co-acrylic acid)) for water absorption and dye removal

Experimental study combined with RSM process optimization for removal of the (Safranin O) cationic dye in the aqueous solution using a hydrogel prepared based on cellulosic biomass: an effective and ecological approach