Abstract:The concept of the "circular economy” aims to minimize waste generation, energy consumption, and CO2 emissions while maximizing the use of agricultural byproducts through economically viable approaches. In this research, coconut shell (CS), an agricultural waste was used to produce carbon composite materials via the hydrothermal carbonization (HTC) technique at a low temperature. A novel CS-based activated carbon (CSAC) for the adsorption of cationic dye was prepared by incorporating graphene oxide (GO), iron oxide, and undergoing alkaline activation. Characterization revealed a well-developed porosity (MCSACSBET: 477.74 m2/g, and MGOCSACSBET: 278.19 m2/g) through HTC method, KOH activation, and GO-iron oxide impregnation. FTIR analysis indicated that the CS derived activated carbon produced from coconut shells contains oxygen-containing functional groups, such as hydroxyl (-OH) and carbonyl (CO). These functional groups has the potential to change the polarity, surface energy, adsorption energy, and energy bands of carbon materials. Various operating parameters affecting the dye adsorption performance, such as initial pH, adsorbent dosage, contact time, and initial dye concentration, have been evaluated. The batch adsorption study revealed that GO and iron oxide functionalized CSAC (MGOCSAC) exhibited higher adsorption performance compared to iron oxide only functionalized CSAC (MCSAC) in COD removal, color removal, and adsorption capacity under the optimum conditions. Reusability studies further confirmed that MGOCSAC retained its high adsorption capacity, with only a 2.9% efficiency drop after five adsorption-desorption cycles. Conversely, MCSAC exhibited an 8.3% decrease, while commercial AC demonstrated a 19.2% reduction. Adsorption using both MCSAC and MGOCSAC was observed to follow the nonlinear Langmuir and Elovich models, which suggested a monolayer chemisorption. Quantum calculations highlighted potential binding interactions between the electron-withdrawing groups in adsorbents and the electron-donating groups in dye molecules, or vice versa. Furthermore, the total production cost of CS-based adsorbents was found to be 10.0%–17.0% less than commercial AC. Overall, the findings suggest that the hydrothermally carbonized and GO-iron oxide functionalized activated carbon derived from coconut shell provides an efficient, and cost-effective solution for dye removal given its simple preparation process, excellent adsorption capacity, ease of separation and high reusability ability.

Synergizing Date Palm Seeds-Derived Oxidized Activated Carbon: Sustainable Innovation for Enhanced Water Retention, Efficient Wastewater Treatment, and Synthetic Dye Removal

Mesoporous Carbon from Optimized Date Stone Hydrochar by Catalytic Hydrothermal Carbonization Using Response Surface Methodology: Application to Dyes Adsorption

Potential of green-based microporous carbon for advanced water decontamination from azo dyes: Experiment and molecular dynamic simulation studies

Combination of catalytic ozonation by regenerated granular activated carbon (rGAC) and biological activated carbon in the advanced treatment of textile wastewater for reclamation.

Adsorptive decolouration of anionic dye from water by goat dropping activated carbon prepared via microwave-assisted H3PO4 activation: process optimization using response surface methodology, isotherm and kinetics modelling

Application of Anionic Hydrogels from Date Palm Waste for Dye Adsorption in Wastewater Treatment

Phosphoric Acid Activated Carbon from Melia azedarach Waste Sawdust for Adsorptive Removal of Reactive Orange 16: Equilibrium Modelling and Thermodynamic Analysis

Removal of malachite green from wastewater using date seeds as natural adsorbent; isotherms, kinetics, Thermodynamic, and batch adsorption process design

Date Palm Biochar and Date Palm Activated Carbon as Green Adsorbent—Synthesis and Application

Adsorption of anionic and cationic azo dyes from wastewater using novel and effective multicomponent adsorbent

Mechanistic studies of phytoremediative eradication of brilliant green dye from water by acid-treated Acacia concinna lignocellulosic waste

Optimizing oxytetracycline removal from aqueous solutions using activated carbon from barley lignocellulosic wastes with isotherms and thermodynamic studies

Sustainable and Green Synthesis of Carbon Nanofibers from Date Palm Residues and Their Adsorption Efficiency for Eosin Dye

Highly Efficient Biosorption of Cationic Dyes via Biopolymeric Adsorbent-Material-Based Pectin Extract Polysaccharide and Carrageenan Grafted to Cellulosic Nonwoven Textile

LDH–Ferrite–Biochar–Polymeric Composites for Enhanced Adsorption–Desorption of Acid Blue 41 and Real Textile Wastewater Purification: A Batch and Column Study

Advancing cobalt ferrite-supported activated carbon from orange peels for real pulp and paper mill wastewater treatment

Development of oxidized sodium alginate/silica hybrid as efficient adsorbent for anionic and cationic dyes: mechanism and thermodynamic studies

Removal of Azo and Anthraquinone Dye by Plant Biomass as Adsorbent – A Review

Recycling waste macadamia nut shells as a low hydrothermally engineered activated carbon for the efficient removal of a RIT navy blue textile dye from aqueous solutions

Graphene oxide impregnated activated carbon derived from coconut shell through hydrothermal carbonization for cationic dye removal: Adsorptive performance, kinetics, and chemistry of interaction

Synthesis and characterizations of conocarpus- and azadirachta-derived activated carbons as wastewater recycling material