Abstract:Cellulose, hemicellulose and lignin valorization from sawdust Summary The valorization of sawdust (SW) biomass by‐product, to extract cellulose through alkali and bleaching processes, including side‐streams to recover hemicellulose and lignin, is performed with the intention of evaluating differences with a proposed green method (GM). The study is developed with the intention of having a process at laboratory scale without leading to the complicated nanoscale processing. This study contemplates a process with scalable characteristics for the future, which contributes to wood processing waste around the world. Particularly, agroindustrial wastes from Durango (SWT1) and Hidalgo (SWT2), local communities of Mexico, were studied. SWT1 and SWT2 samples were processed with ethanol, sodium hydroxide followed by bleaching with sodium chlorite/acetic acid to remove, extractives (E), hemicellulose (H) and lignin (L), respectively. Selected‐SWT2 was processed through a proposed GM using hydrogen peroxide/sodium hydroxide. On the basis of results including Fourier transform infrared spectroscopy, thermogravimetric/differential analysis (TGA/DTG), X‐ray diffraction (XRD), dynamic light scattering, high heating value, scanning electron microscopy techniques and chemical composition, GM was capable of producing a biomass rich in α‐cellulose (58.0%: SWT2‐C), whereas processed SWT1 and SWT2 through conventional method led to a more percentage of H, β‐ and γ‐C mixtures than α‐polymorphous; 41.0% and 51.0%, respectively. This new method could impact of an important manner to the development of biodegradable thermoplastics. The approximation, from deconvolution of TGA/DTA, led to determine adequately the composition of hemicellulose (SWT1‐C: 51.0%, SWT2‐C: 36.0–0.00%), lignin (SWT1‐C: 17.0%, SWT2‐C: 20.0%) and cellulose (SWT1‐C: 32.0%, SWT2‐C: 44.0%). XRD analysis also indicated that samples contain the following percentage of polymorphous cellulose compounds: SWT1‐C (Type II: 71.3%), SWT2‐C (Type I α: 44.6% and II: 41.4%) and SWT2‐C‐GM (Type II: 38.8%), which confirms that the combination of the type of biomass and the applied pretreatment plays a fundamental role for final applications; in this case, it can be appropriate for elastomers and thermoplastic uses. As a final point, the cellulose composition and thermal stability of both sources is comparable with the commonly used raw material for commercial products.

Effect of teak wood lignocellulose pretreatment on the performance of cellulose-graft-(net-poly(acrylamide-co-acrylic acid)) for water absorption and dye removal

Role of surface treatment on water absorption of poly(vinyl chloride) composites reinforced by Phyllostachys pubescens particles

Optimizing cellulose fraction for enhanced utility: Comparative pre-treatment of Agave tequilana Weber var. blue bagasse fiber for sustainable applications

MICRO-CELLULOSE PREPARATION METHOD BASED ON UREA/NaOH DISSOLVED SYSTEM

Synthesis of cellulose-g-poly(acrylic acid) with high water absorbency using pineapple-leaf extracted cellulose fibers

Preparation of porous microcrystalline cellulose from mezcal industry agave bagasse by low reagent loading sequential chemical treatment

Construction of physically crosslinked cellulose nanofibrils/alkali lignin/montmorillonoite/polyvinyl alcohol network hydrogel and its application in methylene blue removal

Structural features influential to enzymatic hydrolysis of cellulose-solvent-based pretreated pinewood and elmwood for ethanol production

Enhancement of cellulose dissolution in water-based solvent via ethanol–hydrochloric acid pretreatment

Valorization of sawdust biomass for biopolymer extraction via green method: Comparison with conventional process

Enhanced Cellulose Extraction from Banana Pseudostem Waste: A Comparative Analysis Using Chemical Methods Assisted by Conventional and Focused Ultrasound

Preparation of hemicellulose-based hydrogels from biomass refining industrial effluent for effective removal of methylene blue dye

Defibrillation and functionalization of cellulose fibers from different sources in one-step via a mechanochemical method

Alkali induced changes in spatial distribution of functional groups in carboxymethylated cellulose

Isolation, Modification, and Characterization of Local Indonesia's Sugarcane Bagasse Cellulose for Dye‐Adsorbent Application

Effect of alkali treatment on enzymatic hydrolysis of p-toluenesulfonic acid pretreated bamboo substrates

Study of the effect of bleaching agents on the crystalline index of cellulose-based materials derived from corn husk by CP/MAS 13C NMR and FT-IR spectroscopies

Effect of hemicellulose content on the solution properties of cellulose carbamates in NaOH/ZnO aqueous system

Influence of Chemical, Morphological, Spectroscopic and Calorimetric Properties of Agroindustrial Cellulose Wastes on Drainage Behavior in Stone Mastic Asphalt Mixtures

A Comparative Study of Mechanism and Performance of Anionic and Cationic Dialdehyde Nanocelluloses for Dye Adsorption and Separation

Comparative Evaluation of Lignin Derived from Different Sugarcane Bagasse Pretreatments in the Synthesis of Wood Adhesive