Abstract:In this study, methods of completing the structural conversion of partly crystalline cellulose II were studied by solid-state 13C CP/MAS NMR spectroscopy and X-ray diffraction. The study incorporated post-treatments of samples that had been mercerized or regenerated to yield somewhat crystalline cellulose II. These post-treatments used different temperatures, lower concentrations of NaOH than used in, for example, the original mercerization, and different neutralization methods. The cellulose employed was originally filter paper from wood pulp that was subsequently mercerized or dissolved and regenerated to create partly crystalline cellulose II. The variations in rate of each component were monitored at different NaOH concentrations and reaction temperatures during the treatment; these components include the crystalline and accessible surface as well as the inaccessible surface/amorphous region. Subsequently, neutralization was performed for the crystallization of cellulose II and the effects of the acid employed were also evaluated. It can be thought that controlling the partial Na-cellulose construction is important for improving the assembly of cellulose II; this is achieved by optimizing the concentration of NaOH, treatment temperature, and selection of acid for neutralization. NMR spectroscopy of the intermediate state of the NaOH detected the partial generation of Na-cellulose; further, another domain exhibited the spectrum of highly crystallized cellulose II. It is believed that the selective Na-cellulose construction in the inaccessible surface cellulose is the result of an increase in the size of cellulose II crystals. During the NaOH treatment, at a concentration of 10%, the crystallinity index evaluated by both NMR and X-ray was maximized; further, at the treatment temperature of 80 °C the crystallinity of the cellulose II evaluated by NMR improved. Moreover, the neutralization, which was conducted after the alkaline treatment with H2SO4, established the most suitable conditions for the crystallization of cellulose II.Graphic abstract Open image in new window

MICRO-CELLULOSE PREPARATION METHOD BASED ON UREA/NaOH DISSOLVED SYSTEM

Modification on the Chemi-mechanical Pulping Property of Rice Straw with Alkali-urea System

The Effects of NaOH-Urea Aqueous Solution on the Strength and Softness Properties of Bamboo Ligno-cellulosic Fibers

Preparation and Characterization of Nanofibrillated Cellulose from Bamboo Fiber Via Ultrasonication Assisted by Repulsive Effect

Effect of hemicellulose content on the solution properties of cellulose carbamates in NaOH/ZnO aqueous system

Pore Structure Control of Cellulose Membrane Prepared Using the NaOH/urea Method

Enhancement of cellulose dissolution in water-based solvent via ethanol–hydrochloric acid pretreatment

Effect of the Dissolving Method on the Dissolution of Dissolving Pulp Cellulose Fibers with Different Dried-States in Different NaOH/Additives Aqueous Solutions

Dissolution of cellulose from different sources in an NaOH/urea aqueous system at low temperature

Solubility of Cellulose in NaOH/Urea Aqueous Solution

13C NMR and XRD studies on the enhancement of cellulose II crystallinity with low concentration NaOH post-treatments

Spectral Property of One-Dimensional Rodlike Nano Cellulose

Optimizing crystal transitions in low-temperature, low-concentration NaOH solutions to prepare cellulose I and II composite materials

Preparation of nanocellulose in high yield via chemi-mechanical synergy

Studying the Improvement of the Solubility of Cellulosic Fibers

Cellulose dissolution in aqueous NaOH–ZnO: effect of pulp pretreatment at macro and molecular levels

Controllable preparation of nano-cellulose via natural deep eutectic solvents prepared with lactate and choline chloride

Highly efficient and green micro/nano cellulose preparation with micro-nano bubbles from mild alkali pretreated bagasse

Cell wall disruption in low temperature NaOH/urea solution and its potential application in lignocellulose pretreatment

Facile Preparation and Characteristic Analysis of Sulfated Cellulose Nanofibril via the Pretreatment of Sulfamic Acid-Glycerol Based Deep Eutectic Solvents

Effects of Preparation Methods on the Morphology and Properties of Nanocellulose (NC) Extracted from Corn Husk