Abstract:Addressing the escalating threat of environmental pollution and ecological risks resulting from the discharge of organic pollutants into aquatic environments demands immediate and comprehensive solutions. In this context, leveraging agricultural waste to produce activated carbon appears to be an intriguing approach to resolving this pressing environmental problem. This study employed doum fiber ( Chamaerops humilis ) as an alternative precursor for producing low-cost and mesoporous activated carbon (ACDF) with a high surface area (630.92 m 2 /g) through a pyrolysis method involving chemical activation with H 3 PO 4 . The adsorption characteristics of ACDF were investigated for removing phenolic pollutants: Bisphenol A (BPA) and α-Naphthol (ANP). The optimal activation conditions were determined using response surface methodology with full factorial design (RSM-FFD), considering four variable factors: Activation temperature (200–600 °C), Activation time (30–180 min), Concentration of H 3 PO 4 (1–10 mol/L), and Impregnation Ratio (0.5–2 g/mL). The results indicated that the best activation conditions were an activation temperature of 600 °C, an activation time of 43.46 min, an H 3 PO 4 concentration of 8 mol/L, and an impregnation ratio of 0.5. The adsorption equilibrium data from kinetics and isotherm analyses demonstrated that the adsorption of BPA and ANP onto ACDF is appropriately described by the pseudo-second-order and Langmuir models. The maximum adsorption capacity of ACDF was 56.11 mg/g for BPA and 69.97 mg/g for ANP. Thermodynamic parameters indicated that the reactions of both pollutants on the ACDF surface were spontaneous, favorable, and exothermic. Moreover, ACDF displayed a higher affinity and stability over five successive cycles for ANP compared to BPA, owing to its reactivity as confirmed by Density Functional Theory (DFT). The interaction mechanism between the adsorbate and the ACDF surface involved main interactions such as electrostatic interaction, hydrogen bonding, and π-π interactions. The results demonstrate that the optimized ACDF is a cost-effective and readily available option for removing phenolic pollutants from industrial wastewater.

Reduction of 2,4-dichlorophenoxy acetic acid herbicide toxicity from aqueous media by adsorption: Experimental and theoretical study using DFT method

Mass transfer models for the adsorption of 2,4-dichlorophenoxyacetic acid (2,4-D) and atrazine herbicides from agricultural wastewaters

Adsorption of 2,4-Dichlorophenol from Aqueous Solution Onto Microwave Modified Activated Carbon: Kinetics and Equilibrium

Evaluation of a novel activated carbon/graphene oxide as an efficient composite adsorbent for the removal of herbicide 2,4-Dichlorophenoxyacetic acid: Adsorption isotherm and kinetics study

Kinetics of adsorption of 2,4-dichlorophenol by nitrogen doping activated carbon

Removal of 2,4-Dichlorophenol from Aqueous Solution by Static-Air-activated Carbon Fibers

Tailoring Natural and Fly Ash-Based Zeolites Surfaces for Efficient 2,4-D Herbicide Adsorption: The Role of Hexadecyltrimethylammonium Bromide Modification

In-depth study of adsorption mechanisms and interactions in the removal of pharmaceutical contaminants via activated carbon: a physicochemical analysis

Influence of important parameters on the adsorption of diclofenac sodium by an environmentally friendly eucalyptus wood biochar and optimization using response surface methodology

Analysis of adsorption characteristics of 2,4-dichlorophenol from aqueous solutions by activated carbon fiber.

Adsorption of 2,4-Dichlorophenoxyacetic Acid from Aqueous Solution Using Carbonized Chest Nut as Low Cost Adsorbent: Kinetic and Thermodynamic

Insights into the adsorption mechanism of chlorpyrifos on activated carbon derived from prickly pear seeds waste: An experimental and DFT modeling study

Removal of 2,4-dichlorophenoxyacetic acid through nitrogen doped modified palm kernel shell from aqueous solutions

Adsorption of emerging pollutants on lignin-based activated carbon: Analysis of adsorption mechanism via characterization, kinetics and equilibrium studies

Adsorption property and mechanism of glutaraldehyde-crosslinked chitosan for removal of 2,4-dichlorophenoxyacetic acid from water

A computational study of adsorption on activated carbons containing basic oxygenated surface groups of two priority organochlorine pesticides from water

Synthesis and optimization of activated carbon from Doum ( Chamaerops humilis ) fiber via pyrolysis-assisted H 3 PO 4 activation for removal of bisphenol A and α-Naphthol

Removal of pesticides by layered double hydroxide modified different clay minerals and site energy analysis

Effective removal of heavy metals from aqueous solutions using activated biomass: Analytical interpretation via molecular dynamic simulation, mathematical and statistical approaches

Machine learning, conventional and statistical physics modeling of 2,4-Dichlorophenoxyacetic acid (2,4-D) herbicide removal using biochar prepared from Vateria indica fruit biomass

4-Chlorophenol adsorption from water solutions by activated carbon functionalized with amine groups: response surface method and artificial neural networks