Abstract:To purify and recycle the low-carbon alcohols and acids in wastewater by a green method with high efficiency is of great significance in chemical engineering process, such as indirect coal liquefaction (Fischer Tropsch Synthesis, FTS), which produces a large amount of alcohol and acid-containing wastewater. Adsorption-desorption of low-carbon alcohols and acids in wastewater by activated carbon is a promising method for industrial application. The adsorption capacity of low-carbon alcohols and acids in activated carbons is closely related with their pore and surface properties. However, this was seldom studied due to the complex properties of carbon materials with different pore size, distribution and volume, as well as surface area and hydrophobicity. In this work, four commercial activated carbon materials (AC1 ∼ 4) with similar hydrophobicity and different pore and surface structure were chosen to explore the possible correlation of the adsorption capacity of C1-5 alcohols, C2-4 acids and FTS modeling wastewater. The batch method was used to investigate the adsorption capacity of AC1 ∼ 4 on low-carbon alcohols and acids as well as FTS modeling wastewater; while density functional theory (DFT) calculation was performed to investigate the adsorption energies of low-carbon alcohols and acids in carbon nanotubes with different pore sizes. Both the experimental and theoretical results indicate that the adsorption capacities of methanol, ethanol and acetic acid are strongly dependent on the ultra-micropores (<0.9 nm) due to their small molecular weight; and the adsorption capacity of pentanol is mainly determined by the surface areas due to its relatively high molecular weight and low polarity; while the adsorption capacities of C3-C4 alcohols and acids are well correlated with the microporous volume and surface area. In addition, and the adsorption capacities of acids were also related with the content of surface COOH species. AC2 has the highest adsorption capacity of mixed low-carbon alcohols and acids (196.2 mg/g) in FTS modeling wastewater due to its abundant ultra-micropore and high specific surface area. This work sheds light into the development of adsorbents with high adsorption capacity of low-carbon alcohols and acids, and provides solid experimental and theoretical support in the further purification of FTS wastewater and recovery of valuable chemicals.

The alkaline sites integrated into biomass-carbon reinforce selective adsorption of acetic acid: In situ implanting MgO during activation operation

Highly Microporous Activated Carbons with Industrial Potential for Selective Adsorption of Ethane over Ethylene

Cost-effective carbon-based amine adsorbents for carbon capture: Equilibrium, kinetics and selectivity

Waste biomass-derived oxygen and nitrogen co-doped porous carbon/MgO composites as superior acetone adsorbent: Experimental and DFT study on the adsorption behavior

Performance optimization and kinetic analysis of HNO3 coupled with microwave rapidly modified coconut shell activated carbon for VOCs adsorption

Efficient removal of acetic acid by a regenerable resin-based spherical activated carbon.

Experimental and molecular perspective on VOCs adsorption and separation: Study of the surface heterogeneity and oxygen functionalizing

Experimental and DFT study on the adsorption of VOCs on activated carbon/metal oxides composites

Adsorption behavior of multicomponent volatile organic compounds on a citric acid residue waste-based activated carbon: Experiment and molecular simulation

Adsorption of Benzene and Methyl-Ethyl-ketone Vapors at Low Concentration by Wet Oxidized Porous Carbons

Drastically boosting volatile acetone capture enabled by N-doping activated carbon: An interesting deep surface digging effect

Modification of coconut shell activated carbon and purification of volatile organic waste gas acetone

Alkylation modified pistachio shell-based biochar to promote the adsorption of VOCs in high humidity environment

Record-high capture of volatile benzene and toluene enabled by activator implant-optimized banana peel-derived engineering carbonaceous adsorbents

Preparation and characterization of activated carbon modified by potassium for carbon dioxide/methane adsorption and separation

ZIF-8 derived porous carbon/ZnO as an effective nanocomposite adsorbent for removal of acetic acid

Optimization performance of viscose rayon derived flexible porous carbon cloths in relation to their CO2 capture, CO2/CH4 separation and methanol adsorption

Experimental and theoretical study of the adsorption of mixed low carbon alcohols and acids from Fischer Tropsch synthesis wastewater by activated carbon

Optimization of Photothermal Catalytic Reaction of Ethyl Acetate and NO Catalyzed by Biochar-Supported MnOx-TiO2 Catalysts

Synthesis of Porous Carbon for Acetone Adsorption: Specific Surface Area, Porous Structure and Oxygen Functional Groups

Behavior of VOCs competitive adsorption with water vapor in a slit-shaped phosphoric acid mesoporous activated carbon model