Abstract:As a typical carbon-based material, activated carbon (AC) has satisfied adsorption performance and is of great significance in the field of volatile organic compounds (VOCs) pollutants removal. In order to further reveal the optimization mechanism of AC adsorption performance, coconut shell-based AC was selected as the research object, and different concentrations of HNO 3 coupled with microwave were used for rapid modification and activation. The characteristic changes of pore structure and surface chemical of AC before and after rapid modification were analyzed, and the performance changes of VOCs absorption were discussed from the perspective of reaction kinetics. The pore structure and surface chemical properties of before and after modification were analyzed by X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), Brunauer-Emmeta-Teller (BET) analysis, Fourier Transform Infrared Spectroscopy (FTIR), and Boehm titration. The results showed that HNO 3 coupled with microwave could significantly eliminate impurities in the pores of AC. After impregnation in HNO 3 at a concentration of 1.5 mol L −1 and under microwave irradiation of 900 W, the number of micropore on the surface of samples increased slightly. When the impregnation concentration of HNO 3 continued to increase, the two adjacent pore structures of the samples merged, which lead to a large decrease in the number of micropore and a corresponding increase in the proportion of mesoporous. Meanwhile, the specific surface area S BET of the modified NAC-6 sample increased to 1,140.40 m 2 g −1 , and the total acidic oxygen-containing functional groups on the surface increased by 0.459 mmol g −1 compared to that of the unmodified raw carbon. Furthermore, by analyzing the experimental results of formaldehyde adsorption on AC samples, it was concluded that the saturated adsorption capacity of the modified NAC-6 sample was 43% higher than that of the raw carbon. This study provides a more convenient and faster modification method for AC in the field of gas phase pollutants purification, which is helpful to realize the practical engineering application of AC with high efficiency, energy saving and sustainable.

Modification of coconut shell activated carbon and purification of volatile organic waste gas acetone

Modifying coconut shell activated carbon for improved purification of benzene from volatile organic waste gas

Highly Microporous Activated Carbons with Industrial Potential for Selective Adsorption of Ethane over Ethylene

Performance optimization and kinetic analysis of HNO3 coupled with microwave rapidly modified coconut shell activated carbon for VOCs adsorption

Hierarchical Pore Structure of Activated Carbon Fabricated by CO2/microwave for Volatile Organic Compounds Adsorption

Preparation and characterization of activated carbon modified by potassium for carbon dioxide/methane adsorption and separation

Modification of coconut shell-based activated carbon and purification of wastewater

The alkaline sites integrated into biomass-carbon reinforce selective adsorption of acetic acid: In situ implanting MgO during activation operation

Cost-effective carbon-based amine adsorbents for carbon capture: Equilibrium, kinetics and selectivity

Multifactor orthogonal analysis on the desorption performances of P/N/S-doped activated carbon for acetone

Preparation of High Efficient Coconut Activated Carbon and Its Adsorption Equilibria and Kinetics of CH4/N2

Adsorption of Volatile Organic Compounds on Activated Carbon Fiber Prepared by Carbon Dioxide

Synthesis of Porous Carbon for Acetone Adsorption: Specific Surface Area, Porous Structure and Oxygen Functional Groups

Drastically boosting acetone capture by O/N co-doped Enteromorpha porous carbon: Key role of optimizing pore structure and improving surface polarity

Adsorption Equilibrium and Thermodynamics of Acetaldehyde/acetone on Activated Carbon

Adsorption of Benzene and Methyl-Ethyl-ketone Vapors at Low Concentration by Wet Oxidized Porous Carbons

Record-high capture of volatile benzene and toluene enabled by activator implant-optimized banana peel-derived engineering carbonaceous adsorbents

Drastically boosting volatile acetone capture enabled by N-doping activated carbon: An interesting deep surface digging effect

Preparation of High-Surface-Area Activated Carbon from Coconut Shell Fibers

Waste biomass-derived oxygen and nitrogen co-doped porous carbon/MgO composites as superior acetone adsorbent: Experimental and DFT study on the adsorption behavior

Preparation of Phosphate-activated Carbon from the Coconut Fibers