Fabrication of high permeability and antifouling composite membrane loaded with Fe 3 O 4 nanoparticles via a magnetic field induced phase separation
Meng Zhang,Shu Jiang,Xishou Guo,Xiaobin Tang,Langming Bai,Jinlong Wang,Han Zhang,Daliang Xu,Rui Wu,Luming Liu,Heng Liang
DOI: https://doi.org/10.1016/j.jwpe.2023.104422
IF: 7
2023-11-02
Journal of Water Process Engineering
Abstract:Membrane fouling increases operational expenses and limits the application of ultrafiltration technology in water treatment. To mitigate the membrane fouling, this study incorporated Fe 3 O 4 nanoparticles (NPs) into the polyethersulfone (PES) membrane casting solution, and developed a non-solvent induced phase separation (NIPS) method assisted by a magnetic field (MGF) to fabricate the Fe 3 O 4 NPs composite ultrafiltration membrane. The combination of MGF and Fe 3 O 4 NPs synergistically enhanced the permeability and separation performance of the composite membrane. The performance of the membrane was determined by its structure. With the involvement of MGF, Fe 3 O 4 NPs were enriched on the surface layer of the membrane, resulting in enhanced hydrophilicity of the composite membrane. The membrane permeability increased to 913.39 LMH·bar −1 , and the rejection performance rose to 93 % due to the formation of tiny pores on the membrane surface that facilitated solvent diffusion during phase separation, thereby counteracting the adverse effects of heightened viscosity in the casting solution. Moreover, the Fe 3 O 4 NPs composite membrane fabricated with MGF induction exhibited significantly enhanced antifouling capability in multi-cycle fouling tests, resulting in a 27.5 % increase in specific flux compared to the pure PES membrane. Additionally, the preparation procedures for the matrix membrane were optimized to include 15 wt% PES, 3 wt% PVP, and a pre-treatment time of 30 s. These findings have significant implications for advancing the widespread application of membrane technology.
engineering, chemical, environmental,water resources