Abstract:Concrete structures in saline soil regions are prone to degradation due to chloride and sulfate erosion, compounded by the concurrent influences of drying, high and low temperatures, and freeze-thaw cycles. This study establishes a simulation test system for complex saline soil environments, integrating findings from real-world environmental investigations. The investigation focused on the degradation mechanism of concrete under the combined impacts of dry-wet and high-low temperature cycles, coupled with composite salt erosion. Additionally, the impacts of water-cement ratio, fly ash content, and basalt fiber content on concrete's mechanical properties and ion erosion resistance were analyzed. The alterations in the internal pore structure of corroded concrete were examined through nuclear magnetic resonance (NMR) technology. Utilizing the XGBoost algorithm, a predictive model for chloride and sulfate ion concentrations in concrete, under the combined influence of dry-wet and high-low temperature cycles, coupled with composite salt erosion, was developed. The findings reveal that the rate of concrete deterioration is gradually accelerating under the combined erosion to dry-wet cycles, high-low temperature cycles, and composite salt. Optimal fly ash and basalt fiber dosages for corrosion resistance are determined to be 10% and 0.10%, respectively. During advanced erosion stages, concrete porosity, capillary and macropore volume fractions increase, while gel pore volume fraction declines significantly. The XGBoost-based chloride and sulfate concentration prediction model demonstrates strong agreement with experimental measurements, yielding correlation indices of R 2 = 0.98 and 0.97, respectively. Interpretation results obtained using SHAP from the machine learning model align with experimental outcomes.

Experimental Investigation on Deterioration Mechanisms of Concrete under Tensile Stress-Chloride Ion-Carbon Dioxide Multiple Corrosion Environment

Effect of chloride penetration on CFRP sheet, CFRP‐concrete interface, and CFRP‐strengthened concrete beams

Chloride penetration in concrete exposed to cyclic drying-wetting and carbonation

Chloride penetration in concrete under marine atmospheric environment – analysis of the influencing factors

Chloride Penetration into Concrete Damaged by Uniaxial Tensile Fatigue Loading

Co-effects of initial and exposure environments on chloride penetration

Accelerating Tests For The Performance Deterioration Of Concrete Exposed To Chloride Media

Effect of Chloride-Induced Reinforcing Steel Corrosion on the Flexural Strength of Reinforced Concrete Beams

Study on the deterioration of concrete performance in saline soil area under the combined effect of high low temperatures, chloride and sulfate salts

Experimental Study on Chloride Ion Transport in Concrete Structure under Shear Stress

Durability Of Concrete Under Coupling Effects Of Cyclic Loads And Chloride Environment

Study on Concrete Deterioration in Different NaCl-Na2SO4 Solutions and the Mechanism of Cl- Diffusion

Chloride Penetrating under Co-Effects of Initial Curing and Exposure Conditions

Chloride transport resistance of alkali-activated concrete exposed to combined chloride, sulfate and carbonation environment

Chloride Transport Behavior in Bending-Shear Section of Reinforced Concrete Beam under Combined Effect of Load and Environment

Comparative Analysis of Microdamage-affected Chloride Transport in Concrete under Static and Dynamic Hydraulic Pressure

Corrosion-induced Shear Performance Degradation of Reinforced Concrete Beams

Theoretical and Experimental Investigation of Loading Effects on Chloride Diffusion in Saturated Concrete

Study on Concrete Deterioration and Chloride Ion Diffusion Mechanism by Different Aqueous NaCl-MgSO4 Concentrations

Durability of Structural Adhesive Exposed to Marine Environment

Atmospheric chloride-induced corrosion of steel-reinforced concrete beam exposed to real marine-environment for 7 years