Abstract:Concrete-to-concrete interfaces present both in new and existing construction, are commonly regarded as the weak link. Durability research of interfaces is a vital prerequisite for structural rehabilitation and strengthening applications under marine and coastal environments. Hence, to clarify the chloride ion transport behavior be-tween the new-old concrete composite system and its constituents, microstructural characteristics of the in-terfaces with various preparation methods were determined via field emission scanning electron microscopy. Then, the time-dependent diffusion chloride ion penetration together with its steady-state concentration distri-bution evaluated by using AgNO3 chromogenic, electron microprobe, and energy spectrum methods, as well as the numerical simulation based on the real interface roughness from the 3D laser scanning optical system. Results show that microcracks and a large amount of CaCO3 precipitations were formed in the concrete-to-concrete interface, where its porosity was higher compared to that of the matrix and interface transition zone around coarse aggregate; Therefore, the interface regions have higher tortuosity of water transport channel and strengthen the solution absorption rate, resulting in the internal chloride ions not only diffuse deeper perpen-dicular to the exposed surface but also ingress into the concrete on both sides as the concentration gradient simultaneously, leading to a "diffusion peak" formation. Furthermore, the effects of groove characteristics (such as orientations, clearance, width, and depth) on chloride transport were modeling evaluated in this study, in which the interfacial relationship could be optimized setting the reasonable groove and achieving the goal of durability equivalent to the cast-in-place structure.

Co-effects of initial and exposure environments on chloride penetration

Chloride Penetrating under Co-Effects of Initial Curing and Exposure Conditions

Influence of Initial Curing Conditions and Exposure Environments on Chloride Migration in Concrete Using Electrochemical Method

Effect of chloride penetration on CFRP sheet, CFRP‐concrete interface, and CFRP‐strengthened concrete beams

Chloride Penetration in Surface-Treated Concrete in Natural and Accelerated Environments

Comparison of Chloride Penetration into Surface-Treated Concrete in Artificial and Natural Environments

Chloride penetration in concrete under marine atmospheric environment – analysis of the influencing factors

Study On Relationship Between Chloride Diffusion In Concrete And Time

Accelerating Tests For The Performance Deterioration Of Concrete Exposed To Chloride Media

Chloride penetration in concrete exposed to cyclic drying-wetting and carbonation

Effecting Coefficients for Concrete Structure Durability Design Index

Chloride Transport Behavior in Bending-Shear Section of Reinforced Concrete Beam under Combined Effect of Load and Environment

Influence of Initial Saturation Degree on Chloride Transport in Concrete under Hydraulic Pressure

Effects of Cyclic Seawater Exposure on the Mechanical Performance and Chloride Penetration of Calcium Sulfoaluminate Concrete

Chloride Ingress Profiles and Binding Capacity of Mortar in Cyclic Drying-Wetting Salt Fog Environments

Effect of Concrete Mixture Proportions on the Chloride Resistance

Long term effect of corrosion inhibitor and associated cation type of chloride ions on chloride profile of concrete exposed to composite chloride-sulfate environment

Effects of material and environmental parameters on chloride penetration profiles in concrete structures

Chloride Ion Ingress Distribution Within an Alternate Wetting-Drying Marine Environment Area

Experimental and Numerical Study on the Microstructure and Chloride Ion Transport Behavior of Concrete-to-concrete Interface

Differences between Time-Dependent Instantaneous and Apparent Chloride Diffusion Coefficients of Concrete in Tidal Environment