Abstract:Ammonium is typically removed from wastewater by converting it to nitrogen gas using microorganisms, precluding its recovery. Copper hexacyanoferrate (CuHCF) is known to reversibly intercalate alkali cations in aqueous electrolytes due to the Prussian Blue crystal structure. We used this property to create a carbon-based intercalation electrode within an electrochemical cell. Depending on the electrode potential, it can recover NH4+ from wastewater via insertion/regeneration while leaving organics. In the first phase, different binders were evaluated towards creating a stable electrode matrix, with sodium carboxymethyl cellulose giving the best performance. Subsequently, based on voltammetry, we determined an intercalation potential for NH4+ removal of + 0.3 V vs. Ag/AgCl, while the regeneration potential of the electrode was + 1.1 V (vs. Ag/AgCl). Using the CuHCF electrodes 95% of the NH4+ in a synthetic wastewater containing 56 mM NH4+ and 68 mM methanol was removed with an energy input of 0.33 ± 0.01 Wh g−1 NH4+. A similar removal of 93% was obtained using an actual industrial wastewater (56 mM NH4+, 68 mM methanol, 0.02 mM NO2−, 0.05 mM NO3−, 0.04 mM SO42− and 0.34 mM ethanol), with an energy input of 0.40 ± 0.01 Wh g−1 NH4+. In both cases, there was negligible removal of organics. The stability of CuHCF electrodes was evaluated either by open circuit potential monitoring (61 h) or by cyclic voltammetry (50 h, 116 cycles). The stability during cycling of the electrode was determined in both synthetic and real streams for 25 h (125 cycles). The charge density (C cm−1) of the CuHCF electrodes declined by 17 % and 19% after 125 cycles in the synthetic stream and the actual wastewater, respectively. This study highlights the possibility of low-cost CuHCF coated electrodes for achieving separation of NH4+ from streams containing methanol. The stability of electrodes has been improved but needs to be further enhanced for large-scale applications and long-term operation.

A novel selective hybrid cation exchanger for low-concentration ammonia nitrogen removal from natural water and secondary wastewater

A novel poly ligand exchanger – Cu(II)-loaded chelating resin for the removal of ammonia-nitrogen in aqueous solutions

Selective removal of ammonia from wastewater using Cu(II)-loaded Amberlite IR-120 resin and its catalytic application for removal of dyes

High Efficient Removal of Cu(II) by a Chelating Resin from Strong Acidic Solutions: Complex Formation and DFT Certification

Amino Silica Nanohybrid Membranes for Enhanced Removal of Cu(II) Ion in Aqueous Solutions

Deep Purification of Low-Strength Ammonium-Containing Wastewater with ANRE Process

Separation and recovery of ammonium from industrial wastewater containing methanol using copper hexacyanoferrate (CuHCF) electrodes

Ammonia enrichment and recovery via ion exchange from municipal wastewater after filtered by ultrafiltration membrane

Selective Recovery of Ammonia Nitrogen from Wastewaters with Transition Metal‐Loaded Polymeric Cation Exchange Adsorbents

Enhancing Resource Recovery through Electro-Assisted Regeneration of an Ammonia-Selective Cation Exchange Resin

CNT/copper hexacyanoferrate: A superior Faradic electrode for ammonium ion removal with stable performance and high capacity

Efficient ammonia removal promoted in a bifunctional system constructed with NiCu–S/DSA electrodes

REMOVAL OF COMPLEX OF Ni(Ⅱ)-AMMONIA FROM THE WASTEWATER BY D463 AND THE MECHANISM INSIGHT

Amidoxime-functionalized polyacrylamide-modified chitosan containing imidazoline groups for effective removal of Cu2+ and Ni2+

Synthesis and Characterization of a Novel Magnetic Cation Exchange Resin and Its Application for Efficient Removal of Cu2+ and Ni2+ from Aqueous Solutions

A novel highly dispersed calcium silicate hydrate nanosheets for efficient high-concentration Cu2+ adsorption

Efficient removal of ammonia nitrogen via a coupled system of Ni 1 Cu 0.2 -Se-T/CP anode and copper foam cathode

Ammonium Removal by a Novel Magnetically Modified Excess Sludge

Exclusive Separation of Cu(II) with Aminophosphonic Acid-Functionalized Hydrogel from Strong Acidic Media

Enhanced Removal of Cu(II) and Ni(II) from Saline Solution by Novel Dual-Primary-amine Chelating Resin Based on Anion-Synergism.

Ammonia removal from low-strength municipal wastewater by powdered resin combined with simultaneous recovery as struvite