Abstract:Photoelectrocatalytic (PEC) process combining the merits of photocatalysis and electrocatalysis is considered as a promising ammonia oxidation technology for water treatment. However, some key issues, such as the limited in situ generation of oxidants on photoanode, slow mass transfer problem and generation of nitrate/nitrite by- -products hinder the further application of PEC process in the treatment of ammonia pollutant. In this study, the graphite felt (GF) cathodes modified by different transition metals (Ni, Fe, Mn, Co, Cu) were screened by physicochemical and photoelectrochemical characterizations. The results show that the Ni-GF cathode with more Ni0 uniformly distributed on the GF surface had the best electrocatalytic activity to generate H2O2. The PEC system composed of 10.0 wt% Ni-GF cathode and optimized titania nanotubes (TNTs) photoanode selectively converted about 96.1% ammonia to N2 within 90 min. Compared with the single TNTs photoanode system, the ammonia oxidation reaction rate constant of the synergistic PEC oxidation system was increased by about two times, which demonstrated the role of the oxidants simultaneously generated on both anode and cathode. The in situ generated reactive oxygen-based oxidants and chlorine-based oxidants interacted together, and ClO center dot acted a leading role in the ammonia oxidation which were confirmed by quenching and probe experiments. In addition, the contributions of center dot OH and ClO center dot were significantly improved in the synergistic PEC oxidation system, compared with the single TNTs photoanode system. Furthermore, the nitrate by-products generated by the ammonia oxidation were further reduced on the Ni-GF cathode. The large amount of active chlorine and active oxygen generated on the electrode diffused into the bulk, effectively overcoming the mass transfer limitation of direct oxidation. Therefore, the developed TNTs photoanode/Ni-GF cathode system can continuously and effi-ciently convert ammonia to N2 without the formation of nitrate/nitrite by-products.

Efficient removal of ammonia nitrogen via a coupled system of Ni 1 Cu 0.2 -Se-T/CP anode and copper foam cathode

Modulation of Charge Distribution Enabling CuNi Nano-Alloys for Efficient Ammonia Oxidation Reaction to Nitrite Production

Sulfur Induced Surface Reconfiguration of Ni1Cu3-S-T/CP Anode for High-Efficiency Ammonia Electro-Oxidation

In situ electro-generated Ni(OH)2 synergistic with Cu cathode to promote direct ammonia oxidation to nitrogen

Efficient ammonia removal promoted in a bifunctional system constructed with NiCu–S/DSA electrodes

Cu/CuOx In-Plane Heterostructured Nanosheet Arrays with Rich Oxygen Vacancies Enhance Nitrate Electroreduction to Ammonia.

Unique three-dimensional nanoflower-like NiCu electrodes constructed by Co, S co-doping for efficient ammonia oxidation reaction

Efficient and highly selective direct electrochemical oxidation of ammonia to dinitrogen facilitated by NiCu diatomic site catalysts

The Enhanced Performance of NiCuOOH/NiCu(OH)2 Electrode Using Pre-Conversion Treatment for the Electrochemical Oxidation of Ammonia

Unlocking the potential of sub-nanometer-scale copper via confinement engineering: A remarkable approach for electrochemical nitrate-to-ammonia conversion in wastewater treatment

Highly efficient electrochemical ammonia synthesis via nitrate reduction over metallic Cu phase coupling sulfion degradation

Copper-nickel-MOF/nickel foam catalysts grown in situ for efficient electrochemical nitrate reduction to ammonia

Efficient Electrochemical Nitrate Reduction to Ammonia Driven by a Few Nanometer-Confined Built-In Electric Field

Optimization of a Hierarchical Porous-Structured Reactor to Mitigate Mass Transport Limitations for Efficient Electrocatalytic Ammonia Oxidation through a Three-Electron-Transfer Pathway

Atomic-dispersed copper simultaneously achieve high-efficiency removal and high-value-added conversion to ammonia of nitrate in sewage

Achieving efficient and stable electrochemical nitrate removal by in-situ reconstruction of Cu2O/Cu electroactive nanocatalysts on Cu foam

Synergistic Active Phases of Transition Metal Oxide Heterostructures for Highly Efficient Ammonia Electrosynthesis

Ni(II)/Ni(III) Redox Couple Endows Ni Foam-Supported Ni2P with Excellent Capability for Direct Ammonia Oxidation

Boosting Generation of Reactive Oxygen and Chlorine Species on Tnt Photoanode and Ni/Graphite Fiber Cathode Towards Efficient Oxidation of Ammonia Wastewater

Boosting Electrocatalytic Ammonia Synthesis from Nitrate with a Dual Active Site Three-Dimensional Copper Electrode

A Wetting and Capture Strategy Overcoming Electrostatic Repulsion for Electroreduction of Nitrate to Ammonia from Low‐Concentration Sewage