Abstract:Electrocatalytic reduction has recently received increasing attention as a method of converting waste nitrate into value-added ammonia, but most studies have focused on complex strategies of catalyst preparation and little has been done in the way of large-scale demonstrations. Herein, we report that in situ activation of a pristine Ni electrode, either on a lab scale or a pilot scale, is effective in facilitating nitrate reduction to ammonia, exhibiting extraordinarily high activity, selectivity, and stability. The self-activated Ni cathode has a robust capacity to reduce nitrate over a wide range of concentrations and achieves great conversion yield, NH4+–N selectivity, and Faradaic efficiency, respectively, 95.3, 95.5, and 64.4% at 200 mg L–1 NO3––N and 97.8, 97.1, and 90.4% at 2000 mg L–1 NO3––N, for example. Fundamental research indicates that Ni(OH)2 nanoparticles are formed on the Ni electrode surface upon self-activation, which play crucial roles in governing nitrate reduction reaction (NO3RR) through the atomic H*-mediated pathway and accordingly suppressing hydrogen evolution reaction. More importantly, the self-activated Ni(OH)2@Ni cathode can be easily scaled up to allow large volumes of real industrial wastewater to be processed, successfully transferring nitrate into ammonia with high yields and Faradaic efficiency. This study demonstrates a new, mild, and promising method of cleaning nitrate-laden wastewater that produces ammonia as a valuable byproduct.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.est.1c02278.Quantification of the concentration of 15NH4+-N by 1H NMR spectroscopy, material characterizations, chemical analysis, electrochemical measurements, calculations of the conversion efficiency (%), product selectivity of (%), Faradaic efficiency (%), and the ECSA, DFT calculations, water quality parameters, variations in the values of cell voltage, comparisons of NH4+-N selectivity and Faradaic efficiency between this study and the literature, schematic diagram of the pilot-scale process flow for nitrate wastewater treatment, photos of the electrolytic reactor, comparisons of plots of –ln(Ct/C0) versus time, CV curves, corresponding capacitive currents, and specific activity between the pristine and the self-activated Ni foam electrodes, variations in the pH values as a function of time at different electrolysis cycles, leaching of Ni2+ during the in situ activation process, variations in the concentrations of NH4+–N and NO3––N at different initial concentrations of NO3––N, QS-XPS survey spectra of Ni foam at different electrolysis cycles, XRD patterns, O 1s and Ni 2p QS-XPS spectra, LSV and CV curves, variations in ECSA-normalized LSV curves, and variations in the concentrations of NH4+–N and NO3––N in the real wastewater (PDF)This article has not yet been cited by other publications.

In situ electro-generated Ni(OH)2 synergistic with Cu cathode to promote direct ammonia oxidation to nitrogen

Modulation of Charge Distribution Enabling CuNi Nano-Alloys for Efficient Ammonia Oxidation Reaction to Nitrite Production

Efficient removal of ammonia nitrogen via a coupled system of Ni 1 Cu 0.2 -Se-T/CP anode and copper foam cathode

Cu/CuOx In-Plane Heterostructured Nanosheet Arrays with Rich Oxygen Vacancies Enhance Nitrate Electroreduction to Ammonia.

Ni(II)/Ni(III) Redox Couple Endows Ni Foam-Supported Ni2P with Excellent Capability for Direct Ammonia Oxidation

Efficient and highly selective direct electrochemical oxidation of ammonia to dinitrogen facilitated by NiCu diatomic site catalysts

Tuning Cu2O morphologies of Cu2O/Ni foam electrodes for the control of reactivity and nitrogen selectivity in direct ammonia electrooxidation reaction

Efficient ammonia removal promoted in a bifunctional system constructed with NiCu–S/DSA electrodes

Sulfur Induced Surface Reconfiguration of Ni1Cu3-S-T/CP Anode for High-Efficiency Ammonia Electro-Oxidation

The Enhanced Performance of NiCuOOH/NiCu(OH)2 Electrode Using Pre-Conversion Treatment for the Electrochemical Oxidation of Ammonia

Achieving efficient and stable electrochemical nitrate removal by in-situ reconstruction of Cu2O/Cu electroactive nanocatalysts on Cu foam

Combining Electrochemical Nitrate Reduction and Anammox for Treatment of Wastewater With Low C/N Ratio Nitrate

Boosting Generation of Reactive Oxygen and Chlorine Species on Tnt Photoanode and Ni/Graphite Fiber Cathode Towards Efficient Oxidation of Ammonia Wastewater

Copper-nickel-MOF/nickel foam catalysts grown in situ for efficient electrochemical nitrate reduction to ammonia

Self-Activated Ni Cathode for Electrocatalytic Nitrate Reduction to Ammonia: From Fundamentals to Scale-Up for Treatment of Industrial Wastewater

Optimization of a Hierarchical Porous-Structured Reactor to Mitigate Mass Transport Limitations for Efficient Electrocatalytic Ammonia Oxidation through a Three-Electron-Transfer Pathway

Unique three-dimensional nanoflower-like NiCu electrodes constructed by Co, S co-doping for efficient ammonia oxidation reaction

Construction of the multi-layer TiO2-NTs/Sb-SnO2/PbO2 electrode for the highly efficient and selective oxidation of ammonia in aqueous solution: Characterization, performance and mechanism

Synergistic Active Phases of Transition Metal Oxide Heterostructures for Highly Efficient Ammonia Electrosynthesis

Preparation of nickel-copper layered double hydroxide on nickel foam as a non-noble catalyst for efficient electrooxidation of ammonia

Building dual active sites Co3O4/Cu electrode to break scaling relations for enhancement of electrochemical reduction of nitrate to high-value ammonia