Abstract:Ammonia (NH 3 ) is widely served as fertilizer, safer chemical hydrogen storage, and energy conservation materials with an annual production around 200 million tons per year. Currently, NH 3 is mainly synthesized via the Haber-Bosch process, which is an extremely energy- and capital-intensive (high temperature 400–500 °C and high pressure 100–350 atm) process, consuming over 1% of the global annual energy output, emitting massive amount of greenhouse gases (~420 Mt CO 2 annually), and causing serious concerns with climate change. Electrochemical nitrogen reduction reaction (eNRR) allows NH 3 production from nitrogen (N 2 ) and water (H 2 O) under ambient conditions. Especially if driven by renewable energies, NRR represents a potentially clean and sustainable strategy for replacing the traditional Haber-Bosch process and alleviating climate change effect. One of the most critical fundamental challenges in production of ammonia via electrochemical nitrogen reduction reaction (eNNR) is developing catalysts which are capable to boost eNRR activity and concurrently suppress the overwhelming competitive hydrogen evolution reaction (HER). This work reports a new strategy to develop such catalysts to alleviate this challenge. This new strategy for the first time takes advantage of the outstanding capability of some redox active transition metal oxides (TMOs) in their super capability in electrochemically controlled proton interstitial doping and the associated remarkable structural changes to boost their NRR activity. Further, inspired by their unique hydrogen intercalation determined HER activity, this new strategy introduced cationic substitutional doping of the TMOs with nonmetal elements, such as phosphorus (P), to modulate their proton intercalation behavior, achieving HER suppression. In this work, tungsten oxide nanosheets (WO 3 ) have been exploited as a typical example of such TMOs to demonstrate the feasibility of this innovative strategy. It is found that cationic P doping also accompanies introduction of large quantity of oxygen vacancies (OVs) in the matrix of the WO 3 and structural changes of the WO 3 lattice. The synergy of the substitutional doping and interstitial doping in tuning the electronic and the local geometric structures leads to significantly enhanced eNNR performance of WO 3 nanosheets. An unprecedented high Faradaic efficiency (FE) of 64.1% with NH3 yield of 24.5 μg h -1 has been reached, representing the highest NRR performance for WO 3 based catalysts. It is worth mentioning that the P-doped WO3 catalyst (200 nm square with a thickness of 20-40 nm) is much larger than most of the reported catalyst. The catalytic yield is even higher than that achieved with atomic thin two-dimensional (2D) WO 3 nanosheets (OV-rich) catalysts (17 μg h -1 with a FE of 7.0%), which is known for their high catalytic efficiency due to the excellent accessibility of all the catalytic active sites. It is also worthwhile to mention that the FE of 64.1% is comparable to that of the natural nitrogenase can be reached (65%), which is unprecedented high compared to most of catalysts reported so far (<25%). In addition, inclusion of Li ions in the electrolyte further increased the NH 3 yield to 60.1 μg h -1 with the high FE largely remained, reached the highest eNNR performance for all the TMO based catalysts. Density functional theory calculations further revealed the synergistic role of interstitial doping of H* and substitutional cationic doping of P, and the associated generation of OVs in increasing the electronic states crossing the Fermi level of the WO 3 and thus reducing reaction energy barrier in N 2 activation and hydrogenation. An interesting non-PCET (proton coupled electron transfer) mechanism is revealed in the first step and the rate determining step during eNNR, providing a new design principle for TMO-based catalysts. Figure 1

Optimization of a Hierarchical Porous-Structured Reactor to Mitigate Mass Transport Limitations for Efficient Electrocatalytic Ammonia Oxidation through a Three-Electron-Transfer Pathway

Modulation of Charge Distribution Enabling CuNi Nano-Alloys for Efficient Ammonia Oxidation Reaction to Nitrite Production

Visualization of Electrochemically Accessible Sites in Flow-through Mode for Maximizing Available Active Area Toward Superior Electrocatalytic Ammonia Oxidation.

Cu/CuOx In-Plane Heterostructured Nanosheet Arrays with Rich Oxygen Vacancies Enhance Nitrate Electroreduction to Ammonia.

The Enhanced Performance of NiCuOOH/NiCu(OH)2 Electrode Using Pre-Conversion Treatment for the Electrochemical Oxidation of Ammonia

Efficient removal of ammonia nitrogen via a coupled system of Ni 1 Cu 0.2 -Se-T/CP anode and copper foam cathode

Sulfur Induced Surface Reconfiguration of Ni1Cu3-S-T/CP Anode for High-Efficiency Ammonia Electro-Oxidation

In situ electro-generated Ni(OH)2 synergistic with Cu cathode to promote direct ammonia oxidation to nitrogen

Synergistic Active Phases of Transition Metal Oxide Heterostructures for Highly Efficient Ammonia Electrosynthesis

Construction of the multi-layer TiO2-NTs/Sb-SnO2/PbO2 electrode for the highly efficient and selective oxidation of ammonia in aqueous solution: Characterization, performance and mechanism

Decoupling Electron‐ and Phase‐Transfer Processes to Enhance Electrochemical Nitrate‐to‐Ammonia Conversion by Blending Hydrophobic PTFE Nanoparticles within the Electrocatalyst Layer

Ni(II)/Ni(III) Redox Couple Endows Ni Foam-Supported Ni2P with Excellent Capability for Direct Ammonia Oxidation

Electronic Metal–Support Interaction Triggering Interfacial Charge Polarization over CuPd/N‐Doped‐C Nanohybrids Drives Selectively Electrocatalytic Conversion of Nitrate to Ammonia

Promoting the OH cycle on an activated dynamic interface for electrocatalytic ammonia synthesis

Simultaneous Boosting Nitrogen Reduction Activity and Suppressing Hydrogen Evolution Reaction Activity of Transition Metal Oxide Based Electrocatalyst

Regulating Interfacial Microenvironment in Aqueous Electrolyte via a N2 Filtering Membrane for Efficient Electrochemical Ammonia Synthesis

Enhanced Nitrate-to-Ammonia Conversion through Ag-Cu-P Catalyst for Sustainable Ammonia Generation under Ambient Conditions

Unique three-dimensional nanoflower-like NiCu electrodes constructed by Co, S co-doping for efficient ammonia oxidation reaction

(Digital Presentation) Electrocatalytic Ammonia Oxidation Coupled with Hydrogen Production - Moving Towards a Carbon Neutral Water Treatment Cycle

Efficient Electrochemical Conversion of Nitric Oxide to Ammonia Using a Porous Nickel Catalyst in a Membrane Electrode Assembly Electrolyzer

MOF-on-MOF Heterostructured Electrocatalysts for Efficient Nitrate Reduction to Ammonia.