Abstract:Large-volume concrete box girders are vulnerable to early cracking because of the hydration reaction at early ages. The excessive temperature difference between the core and external surface is the main reason for early cracking. Controlling the temperature field of concrete can reduce the risk of early cracking. Therefore, numerical simulations and tracking tests of a 50-m box girder were conducted. The early-age temperature field was simulated using ABAQUS and the secondary development of the subroutine. Meanwhile, the influences of different construction and curing method parameters were analyzed. The subroutine UMATHT considers the variations of hydration degree, thermal conductivity, and specific heat with equivalent age. The results indicate that the early - age hydration temperature of the box girder follows a general trend of "increasing temperature — continuous high temperature — cooling." The measured results verify the accuracy of the numerical simulation method. The temperature peak and temperature difference between the core and surface increased with the increase in concrete section size, pouring temperature, and cement dosage. The effects of pouring temperature and cement dosage on the temperature rise and cooling rate were reversed. For every 5 °C decrease in the pouring temperature, the temperature peak of the web also decreased by approximately 5 °C, while the temperature difference between the core and surface of the web decreased by approximately 2 °C. When thermal insulation measures were taken for the box girder's outer formwork, the concrete temperature peak increased slightly, but the temperature difference between the core and surface decreased significantly. When the thickness of the polystyrene foam board reached 1 cm, the temperature difference between the core and web surface could be controlled within 6.1 °C.

Thermal analysis and adiabatic calorimetry for early-age concrete members

Concrete Thermal Cracking Analysis with Cement Hydration Model and Equivalent Age Method

Research on the application of thermosyphon in temperature control of large concrete structures

CALCULATION OF TEMPERATURE FIELDS IN EARLY AGE CONCRETE BASED ON ADIABATIC TEST

Model for Hydration Heat of Cement in Concrete and Its Application

A Simulation Analysis Research on the Material Performance of Resin Concrete

TEMPERATURE FIELD ANALYSIS IN MASSIVE CONCRETE CONSTRUCTED LAYER BY LAYER

Analysis of early-age thermal stress in concrete structure

Application of Equivalent Age Method to Concrete Thermal Cracking Control at Early Ages

Thermal Analysis of Mass Concrete Embedded with Double-Layer Staggered Heterogeneous Cooling Water Pipes

Evaluation of Early Age Mechanical Properties of Concrete in Real Structure

ANALYSIS OF THERMAL STRESS IN EARLY AGE CONCRETE BASED ON AGING DEGREE METHOD

Effects a simplified numerical model for temperature profiles of early age concrete

Early Age Properties and Cracking Control of Concrete

A Coupled Hygro-Thermal Model of Early-Age Concrete Based on Micro-Pore Structure Evolution

Modeling of temperature distribution in mass concrete structure and proposal of method for identification of thermodynamic parameters

Analysis on early-age inner stress in concrete structure

Transient Nonlinear Heat Conduction in Concrete Structures: A Semi-Analytical Approach

Early-Hydration heat and influencing factor analysis of Large-Volume concrete box girder based on equivalent age

Equipment for adiabatic thermal change of concrete and its application

A Simplified Numerical Model for the Temperature Profile of Early-Age Concrete