Abstract:Abstract Low alloy and stainless steel are the most used types of iron-based materials world wide. Their use against in machine element work, reclamation, corrosion and wear resistance are still challenging. To overcome this problem, many steel alloys are coated with cermet coatings to protect the parts from wear and corrosion. In the present study, WC-Co and WC-CoCr coatings were applied by means of a high velocity oxy-fuel (HVOF) technique on AISI 304, AISI 1040, and AISI 4340 steel alloys used as substrates. The aim was to investigate surface properties and wear resistance of the coatings and to determine their relationship with the type of coating and substrate. In accordance with this purpose, hardness and thickness of the coatings were measured, sliding wear tests were performed, scanning electron microscope (SEM) images and X-ray diffractions (XRD) were taken, surface roughness and friction coefficients were determined. The results showed that the WC-CoCr coatings had higher hardness and lower thickness than the WC-Co coatings. Maximum hardness was obtained in the WC-CoCr coating applied to AISI 4340 steel, which was also the hardest alloy among those studied. After wear resistance tests, it was revealed that the wear resistance of the WC-CoCr coatings was better than that of the WC-Co coatings for each steel substrate. During the coating, the new phases resulting from the decomposition of the WC phase in the WC-CoCr coatings contributed more to wear resistance than those of the WC-Co coatings. A lower friction coefficient and lower surface roughness of the WC-CoCr coatings during wear were obtained, resulting in higher wear resistance. A WC-CoCr coating on AISI 4340 alloy which has the highest hardness, lowest surface roughness and lowest friction coefficient resulted in the highest wear resistance among all types studied.

Crack and Wear Resistance of Hard Coatings

Comparative Study of Thermally Sprayed Coatings Under Different Types of Wear Conditions for Hard Chromium Replacement

Microstructure and Corrosive Wear Properties of CoCrFeNiMn High-Entropy Alloy Coatings

Wear properties of WC–Co and WC–CoCr coatings applied by HVOF technique on different steel substrates

Wear Behaviour of Hard Chrome and Tungsten Carbide-HVOF Coatings

Hard corrosion-resistant coatings for constructional applications

Dry sliding wear behavior of hard-chrome and zinc-phosphate conversion coatings on steel substrates

Engineering Properties of Chromium Plating and Electroless and Electroplated Nickel

Impact Wear of the Protective Cr3C2-Based HVOF-Sprayed Coatings

Comparative Micro-Scale Abrasive Wear Testing of Thermally Sprayed and Hard Chromium Coatings

Effect of Microstructure and Hardness on Cavitation Erosion and Dry Sliding Wear of HVOF Deposited CoNiCrAlY, NiCoCrAlY and NiCrMoNbTa Coatings

Microstructure and wear resistance of Fe-Cr-C-Mo-V-Ti-N hardfacing layers

Wear and Oxidation Behaviour of Tungsten Carbide Based Coatings: A Review

Influence of Cr on the Surface Properties of the Micro-Textured WC+Co Alloy Coating

Effect of alloying elements on microstructure, wear, and corrosion behavior of Fe-based hardfacing

Corrosion of thin hard PVD coatings

Some metallurgical factors controlling the adhesive and abrasive wear resistance of steels. A review

Tribological behaviour of TiAlN and AlCrN coatings on stainless steel

Efficiency of Application of (Mo, Al)N-Based Coatings with Inclusion of Ti, Zr or Cr during the Turning of Steel of Nickel-Based Alloy

Comparison of Wear Resistance of Overlay Welded Layers and Thermal Sprayed Coatings in Real Conditions

Structural-Phase State and Fracture of a Low-Carbon Steel Coating